Member Avatar for trigrand

14 inch monitor was replaced with a new 17 inch monitor. Now the computer must be booted twice to get the monitor to turn on. Everything else works ok. Computer is a 450 mh running Windows98 with 64 meg ram. I don't think it is the power management program because I turned it off wherever I could. Does a 17 inch monitor require a signal that the 14 inch did not? Other 17 inch monitors were tried and all required 2 boots of this computer. (Just this one computer does this.)

  • 7 Contributors
  • 7 Replies
  • 159 Views
  • 4 Years Discussion Span
  • Latest Post Latest Post by Rob Leth

Recommended Answers

All 7 Replies

Member Avatar for Dani

Weird, I never heard of this before. How far does it go in the boot process? Does it show ANYTHING on the screen? Does it start to boot into Windows and then shut off? etc ...

Member Avatar for trigrand

The first boot process can be only seconds (incomplete) and during this time (from a second or two to a full boot) there is nothing on the monitor. Then the computer is turned off, back on and a normal startup takes place with the usual screen activity. Of course, this is more of a puzzle than anything because the computer is in use every day, all day with no other problems. My thought is something in the early bios but this was never a problem with the 14 inch monitor.

Member Avatar for Bob

You're sure it wasn't a special offer, free pair of boots with every monitor?

[groan, sorry!]

Member Avatar for aeinstein

lol! :)

Member Avatar for Tekmaven

Does the computer beep when it starts up and the monitor has no picture?

Member Avatar for TallCool1

...the computer must be booted twice to get the monitor to turn on.

Go into the BIOS. Turn OFF everything related to ACPI or APM. It's a good start.

Another thing to try: set the resolution to 640x480@60 Hz and see if that helps. It's possible that the monitor is seeing an out-of-range signal on the first boot. If that works, set the rez back as you see fit once it's working.

Member Avatar for Rob Leth

I have a similar problem. Don't know the answer. I tried swapping-in different monitors, cables, video cards. I have not tried anything with the bios. Nothing seems to help except that a PCI video card, instead of the AGP, will sometimes turn-on the monitor without having to boot twice. Sometimes I will get the video warning beeps particular to this FIC systemboard. This is what I am going to try next, if I ever get the time! I am going to swap-in a new systemboard button battery. I am going to jiggle the connections in the wiring manifold, the one that the power button, HD LED, etc., plug into. I am going to clean/roughen the contacts in the power button itself. At this point I am thinking that it is just a systemboard gone bad. Oh yeah, I forgot to mention that if the computer is all warmed-up, it the monitor will fire-up if I do a restart, but if I leave the computer off for 10 minutes or so the monitor will not start without rebooting twice (hmmm...bad trace?).

Be a part of the DaniWeb community

We're a friendly, industry-focused community of developers, IT pros, digital marketers, and technology enthusiasts meeting, networking, learning, and sharing knowledge.