windows update can't download

hi guys i can't download the latest patches for windows
i contact microsoft support and was advice to do this:
If you are running Ad-aware, ZoneAlarm, PC-Cillin, Norton Antivirus, Norton Internet Security, Norton Personal Firewall, McAfee, Proxomitron pop-up blocker, Ad Muncher, web accelerator e.g. "Slipstream", I would recommend you to temporarily disable or shut down any of these installed on your system
and try accessing Windows Update site. Be sure to enable them again when you complete the update process.

Step 1

The particular issue you are encountering indicates that the database where Windows stores the information on who is and is not trusted to install programs on your machine has become corrupted and unusable. To correct this:

Note: The Catroot2 folder is related with Windows Update and deleting or renaming this folder would not harm your system in anyway. When you next logon to Windows Update Site, this folder will be automatically recreated.

1. Close any windows you have open.
2. Click on Start, then My Computer
3. Open the C drive
4. If this is an upgrade over Windows 2000, open the WINNT folder. If not, open the WINDOWS folder.
5. Open the System32 folder
6. Find the CatRoot2 folder and right-click on it, and select RENAME. Change the name to CR2OLD. Make sure you hit Enter after typing in the new name, so the changes can be saved.
7. Close this window.

Now connect to http://windowsupdate.microsoft.com and check the status of the issue. I hope after the above steps you should be able to install the updates. If the issue continues, kindly proceed to next set of instructions.

Step 2

This error can occur if one or more of the following services are disabled or not running. We will therefore RESET Background Intelligent Transfer Service and the Automatic Updates service.

1. Click Start --> select Run. In the Run box, type services.msc Click OK
2. Find the Background Intelligent Transfer Service. Right-click on it and select Properties
3. Click on Stop and then again click on Start. In the Startup Type list, make sure that "Automatic" is selected. Click OK
4. Similarly find Automatic Updates service. Right-click on it and select Properties
5. Click on Stop and then again click on Start. In the Startup Type list, make sure that "Automatic" is selected. Click OK
6. Close the Services window

[Please note that if the service is already started the "Start" button will be grayed out. In this case "Stop" the service and then "Start" it again. On the other hand if the service is not running, the "Stop" button will be grayed out. In this case "Start" the service]

Step 3

We also need to register the ActiveX control files needed to access the Windows Update Site. We need to do this since the error can occur if these files are unregistered on your system. To do this you can try the instructions provided below:

Note: There is a Single Space between the regsvr32 command and the file name JSCRIPT.DLL . The same goes with all the commands provided below.

1. Click on Start, point to "Run"
2. Type in "regsvr32 JSCRIPT.DLL" (without double quotes) and click Ok.
3. Type in "regsvr32 MSXML3.DLL" (without double quotes) and click Ok./
4. Type in "regsvr32 ATL.DLL" (without double quotes) and click Ok.
5. Type in "regsvr32 WUAPI.DLL" (without double quotes) and click Ok.
6. Type in "regsvr32 WUAUENG.DLL" (without double quotes) and click Ok.
7. Type in "regsvr32 WUAUENG1.DLL" (without double quotes) and click Ok.
8. Type in "regsvr32 WUCLTUI.DLL" (without double quotes) and click Ok.
9. Type in "regsvr32 WUPS.DLL" (without double quotes) and click Ok.
10. Type in "regsvr32 WUWEB.DLL" (without double quotes) and click Ok.
i respond with this:
Hi,I tried all solutions listed but no results,,I have to indicate the following..from the programs you listed I only have zonealarm pro,I shut it down and proceed with the instructions.
note: on step#2 "background intellingent transfer service" you asked me to click on properties,fine,and then click on stop and then click on start,,but stop is grayed out[disable] only start shows,,when I click on start I receive this message[look at the attachment] "windows could not start the background intellingent transfer service on local computer,error code 2147024894
i enclosed some pictures,any help would be appreciated,thanks

can you post what the event viewer log file says? or take a SS of the log?

sorry my ignorance..but,where can i get that event viewer log.? and what is a SS of the log?

i iwas having the same problem you were. but i justfollowed all the steps and it fixed i can now update. but before i did that i ran like every spyware thing know to man to completley clean my system. :cool:

i followed all the steps,,only the background intelligent transfer service is disable..and when i click start i get "windows could not start the background intelligent transfer service on local computer.....and refer to service specific error code -2147024894"
i also run counterspy,,and nothing,,no update yet

hmmm try contacting microsoft and give them that specific error. See if they can help ;)

on the first post i wrote that i contact microsoft already,,and they gave me these instructions,,,i e-mail then back and looks like they have the weekends off

o yes i see that well i dont know what the probllem is. i would start at the first sterp and do them all again. make sure you dont skip part of one. sry but thats all i got :sad:

do you have a router?do you have highspeed internet connection?.if so try hooking your dsl/cable directly up to your pc,circumventing your router.if you can get updates then you have an issue with router firewall,and check router manufacturers site for configuration tips. :lol:

good idea h

do you have a router?do you have highspeed internet connection?.if so try hooking your dsl/cable directly up to your pc,circumventing your router.if you can get updates then you have an issue with router firewall,and check router manufacturers site for configuration tips. :lol:

but i was downloading the updates normally..and what seens not to work now is the BITS Background Intelligent Transfer Service

so u ran services.msc found it right clicked it hit properties then stop than start. thats what microsoft said to do or is that where the problem comes in

so u ran services.msc found it right clicked it hit properties then stop than start. thats what microsoft said to do or is that where the problem comes in

the stop button is grayed out[disable]...only "START" is enable..and when i hit start it gives me the error message
""windows could not start the background intelligent transfer service on local computer.....and refer to service specific error code -2147024894"

well i'm still waiting for a response for microsoft..now..i did a "windows repair"..and when it was installing it brought me to errors one for outlook express[that i never use]and the other one for "windows update" c:\windows\system32\inetcomm.dll . maybe damage or corrupted.. ok when it brought windows back,, SP2 was deleted..i installed the SP2 and got another error message..it couldn't installed "service pack2 setup error" windows xp has been partially updated and may not work properly...i log onto windows update ,,it takes some time..and then i get "error#0x8007005" the website has encountered a problem and can not display the page you're trying to view.
so i'm going from back to worse..what can i do..i think that if i get a fresh copy,,i'll get the same error about windows update..oh.i'll bring this to the technician..last STEP
note:..also now i had problems opening my WORD program,,nero...and limewire..

Be a part of the DaniWeb community

We're a friendly, industry-focused community of developers, IT pros, digital marketers, and technology enthusiasts meeting, networking, learning, and sharing knowledge.