Posts
 
Reputation
Joined
Last Seen
Ranked #461
Strength to Increase Rep
+8
Strength to Decrease Rep
-2
100% Quality Score
Upvotes Received
13
Posts with Upvotes
13
Upvoting Members
12
Downvotes Received
0
Posts with Downvotes
0
Downvoting Members
0
10 Commented Posts
~75.8K People Reached
About Me

IT

Interests
Coffee, computers, chaos...french disco
PC Specs
Too many to list, none of them interesting anyway.
Member Avatar for the b

Right click the [b]My Computer[/b] icon and choose [b]Properties[/b]. Go to the [b]Hardware[/b] tab and click [b]Device Manager[/b]. Is the modem listed here? Do you have any devices showing up as "Unknown"? If the modem is there make sure it's enabled and then double click it and go to the …

Member Avatar for Adongo
2
3K
Member Avatar for Daemon9

Usually you just paste the ip of the router into your web browser. Linksys is usually 192.168.1.1: [url="http://192.168.1.1"]http://192.168.1.1[/url] If you don't know the ip of the router you can try clicking [b]start-->run-->[/b]then type [b]cmd [/b]and click "OK". In the command prompt type: [b]ipconfig [/b]and press "Enter" on the keyboard. If …

Member Avatar for Reverend Jim
-1
3K
Member Avatar for AmbaLee368

Very interesting topic. I just wanted to get some stuff down in writing about this real quick for the record... Freaky fellas, if you can't: a. Give up the naughty pictures for someone you really care about. b. Find a freaky chick who's into it. (recommended) ...you don't belong in …

Member Avatar for azad hasan khan
0
1K
Member Avatar for AmjadIT

Since you go for the simple cheap solution you should be willing to accept simple cheap answers: Why not configure more accounts for Outlook and just switch to the correct account for where you want to send? If it works when both domains are on the same computer using POP …

Member Avatar for hafeezRizvi
0
331
Member Avatar for wapper

What VPN are you using? If it's an application then have you tried reinstalling it? For instance, Cisco VPN places a device in Device Manager and I would guess that if I uninstalled it I would have to: a. really know what I'm doing with the settings for that particular …

Member Avatar for don_jojo
0
3K
Member Avatar for bobbylicious_z3

What kind of laptop is it? Sometimes you can get weird display if the cable comes loose. Have you tried pulling the battery on it at all?

Member Avatar for TonyPaskitti
0
570
Member Avatar for extofer

I would be happy to assist with this issue but you need to be more specific and clear about your setup. Exactly what is the network topology and desired functionality: devices, services and ip info? What kind of VPN server? What networking devices are you using, what are you [i]trying …

Member Avatar for martinpouis198
0
368
Member Avatar for jackknob

Not necessarily related but it sure looks like it could be and sheds some light on the nature of the problem: [url="http://support.microsoft.com/default.aspx?scid=kb;en-us;255770"]http://support.microsoft.com/default.aspx?scid=kb;en-us;255770[/url]

Member Avatar for digioz
0
2K
Member Avatar for Picko70

Remove that program from the [b]Control Panel-->Add/Remove Programs[/b] Also remove any other programs you do not need. If you are unsure what you need and don't need then write down the name of the software and you can always go back and reinstall it. You can leave Windows Service Packs …

Member Avatar for simmi100
0
1K
Member Avatar for Izaak

It'd be nice to know what it's barfing about in the blue screen as that will sometimes tell you what you need to do to fix it...I guess usually I'd start by replacing the system file if possible: [list=1] [*]Start your computer with the Windows Setup floppy disks or with …

Member Avatar for crunchie
0
317
Member Avatar for marelfox

Didn't the thread subject ask how to do it automatically? [QUOTE][b]how do i auto-shut down windows XP?[/b][/QUOTE]In the [b]Control Panel[/b] go to [b]Scheduled Tasks[/b] launch the wizard and where it gives you the option to browse go to [b]C:\windows\system32[/b] for the name of the file you can use the [b]shutdown[/b] …

Member Avatar for Mark2011
0
351
Member Avatar for smoiu

Try the administrative share which will be whatever drive letter the external HD uses +$ [b]example:[/b] [url="file://\computer"]\\computer[/url] name\e$

Member Avatar for adam smithhhh
0
860
Member Avatar for lagspike.exe

What kind of network are you on? Campus? Cable? DSL? T1? What is the physical setup? Are you in a building with a lot of other people in your close proximity? First things first: security Make sure you have a secure password on the router itself. Incorporate symbols like @$#%! …

Member Avatar for ansaf
0
261
Member Avatar for crazymisskitty

Make a backup of your data to CD or email it to yourself! This is what I would do if I could [b]not[/b] reinstall Windows from scratch. Go to the Control Panel and remove Norton a/v. Then remove any other non-essential or free software from [b]Add/Remove Programs[/b]. My bet is …

Member Avatar for budedwards
-1
1K
Member Avatar for Billj12901

This is exactly why I'll never buy another Asus board...seen this happen too many times and for no reason with their boards. Had one of these Asus boards do this to me one time, no reason it just stopped booting, I tried all kinds of stuff...ended up going in the …

Member Avatar for jarade
0
516
Member Avatar for lgold5

[QUOTE=mikeSQL]You could also remove the program the hard way just to wipe it completely off your disk and any configuration that assocciates with it without harming anything by going to: [CODE] START/RUN <--- type in: [u][b]regedit[/b][/u] [/CODE] Once you get to the registry screen, at the top next to file.... …

Member Avatar for mwooge
0
2K
Member Avatar for harmeet

Is there some reason you can't just use RDP? I haven't messed with the VMWare much. I'd have to say something with the mouse emulation...seems VMware would know about that if that were the case when you called them. Good luck.

Member Avatar for anunay.amar
0
739
Member Avatar for chyenn

Did you recently install anything such as a firewall or a VPN client...maybe a Windows update? Can you get into safe mode? Also, do you have the Nortel VPN client installed or any other VPN client? It would be helpful to know the model of your laptop, if this is …

Member Avatar for caperjack
0
127
Member Avatar for F.A.T.F

If you're using a pop up blocker try disabling it. Have you installed Service Pack 2? You can check by clicking [b]Start-->Run-->[/b]and then type [b]Winver[/b] and click ok...this will tell you the level of service pack installed.

Member Avatar for NTFS2020
0
555
Member Avatar for cargenius42

Are you talking about a shared folder here? If so then just go to the properties of the share and look at the permissions then remove the rights for "Everyone" and then assign rights to the accounts that should have access. I usually leave Administrators and System in the access …

Member Avatar for bijoys93
0
291
Member Avatar for McLia

it's probably also to the virus if not just hotmail in general. clear your cache...[b]Tools-->Internet Options-->Delete files[/b] I have good luck logging in from Japan...give it a shot: [url="http://hotmal.co.jp"]http://hotmal.co.jp[/url] the language should change to english automatically...lot of times especially when there's web traffic i see hotmail suffer the most. Update …

Member Avatar for colacindy31
0
275
Member Avatar for Tay

[QUOTE=Tay] But I sure not even one person access the particular computer before I am. Please help.[/QUOTE] Are you trying to get to a shared folder? If that is the case and you have rights over the machine that the share resides on you can run Computer Management on that …

Member Avatar for rai joy
0
285
Member Avatar for grumpyxp

[QUOTE]Windows has been completely restored[/QUOTE] Reinstalled or Restored? Have you tried removing hardware down to ram + video?

Member Avatar for Tcll
0
269
Member Avatar for bops

[QUOTE=bops]is there any way you can open and close ports without having any special software and firewalls etc ?[/QUOTE] To be as general as the question posed, the answer is yes. Starting a built-in service such as Terminal Services on Windows XP that advertises a port will open the port …

Member Avatar for steve7132
1
512
Member Avatar for bjeffery

Are all the systems involved with this problem running up to date Microsoft patches? When did this start happening? Which server handles File and Print services on that network? If this is something that just started then what's changed? Have the servers handling DFS or File and Print had the …

Member Avatar for jamtech338
0
138
Member Avatar for caronq

Create a new account and log in with it instead of your usual account...if you no longer have the problem then you know it's an issue with your user profile and you can google how to back it up and then recreate it or ask for help here! Creating a …

Member Avatar for Minster
0
355
Member Avatar for actfray

Before you do anything else tell your landlord to change the channel from the default (usually 6 on linksys) to 3 or 9...sounds like both of you are getting interference in the signal...probably another access point operating on the same channel. Another thing I've noticed with the linksys routers is …

Member Avatar for Fix My Computer
0
374
Member Avatar for Danarchy

I too recommend Firefox - was quicker than trying to sort out whatever it was with Safari, though now I am curious about it too as I have had it happen to me as well. I mess with Apples when other people have problems with them, there is one in …

Member Avatar for Danarchy
0
254
Member Avatar for 2big

Disable pop-up blocker...obviously seems like spyware is a common issue in here so that could be it. There's a particular one that shows up as something like "Web Tools for IE" or "search bar" that totally jacks JS - you'll forgive me but I don't remember right off hand. Another …

Member Avatar for ohyeah
-3
3K
Member Avatar for Paddy

You can use [url="http://www.partimage.org/"]this[/url] [b]free[/b] utility in conjunction with [url="http://www.sysresccd.org/"]this[/url] Linux rescue CD to take images and restore them as you wish. The utility currently only has experimental NTFS support, but so far it works fine w/XP for me...the author of the software says it will generally work for NTFS …

Member Avatar for QuantumFire
0
322