The wires on my case are listed as follows
Mic In , Mic Bias , Ground , Spk Out R , Spk OutL ,
Return R , Return L
While the motherboard is worded as follows
Mic , Mic Power , Aud-Out R , Aud-Out L , GND , +5VA , GND (again) , Backout-R , Backout-L
Please help me match these up. Thanks.
The wires on my case are listed as follows
Mic In , Mic Bias , Ground , Spk Out R , Spk OutL ,
Return R , Return LWhile the motherboard is worded as follows
Mic , Mic Power , Aud-Out R , Aud-Out L , GND , +5VA , GND (again) , Backout-R , Backout-LPlease help me match these up. Thanks.
how do i match these
wires on my case are listed as follows
Mic In , Mic Bias , Ground , Spk Out R , Spk OutL ,
Return R , Return L
While the motherboard is worded as follows
Mic , Mic Power , Aud-Out R , Aud-Out L , GND , +5VA , GND (again) , Backout-R , Backout-L
Mic In = Mic
Mic Bias = Mic Power
Spk Out R=Aud-Out R
Spk OutL =Aud-Out L
There are a few, I would look at the motherboard spec's for the rest of the info, you didn't tell us what it was
asus pinout to new case not responsable for others
pin1 mic2 = mic in
pin3 micpwr = micbias
pin5 lineout_r = r-speaker out
pin7 nc
pin9 lineout_l = l-speaker out
pin2 agnd = ground
pin4 +5va
pin6 bline_out_r =return r
pin8 empty no pin
pin10 bline_out_L =return L
good luck
Ok I have a question. I bought a case and trying to hook up front panel audio but the case connections are different from what mobo has. Connects are
Case:
Return R
Return L
Spkout R
Spkout L
Mic In
Mic Bias
Grnd
Mobo Connections:
Port1L
Port1R
Port2R
Port2L
Sence_Send
Ground
Presence #
Sence1_Ret
Sence2_Ret
Which wires go where I am lost. Thank you again for the help. The board is a Intel D915PGN. Thank you again
We're a friendly, industry-focused community of developers, IT pros, digital marketers, and technology enthusiasts meeting, networking, learning, and sharing knowledge.