Installing Software

[Nemesis]

I have installed RH9 on a box at home and I am really new to this OS. I was wondering if anyone can help me with installing a package manager. I am not really sure what I am doing. Once I figure out how to install this I should be able to continue with installing other applications.
Any help would be nice.
Oh and I was wondering how do I change GUI desktops from GNOME to KDE?

[DMR]

Program installation methods differ depending on the type of program you are trying to install. Redhat uses the RPM utility to manage .rpm programs, but if you have a .tar, tar.gz, .tgz, or similar install file, the steps for installing are entirely different.

From an old post of mine at the *cough!**shameless plug**cough!* other forum I moderate:

In general, RPM (Redhat Package Manager) files contain pre-compiled, ready-to-run programs and associated files such as instalation/usage documentation, etc.
.tar.gz files, on the other hand, often contain the source code for a given program. This isn't always true; but it often is. If that's the case, you'll have to compile the progam yourself; instructions on how to do so are usually included. The .tar.gz extension comes from the following:

The .tar part indicates that the file actually consists of multiple files combined into one large archive file using the "tar" (Tape ARchive) program. The .gz part means that the resulting .tar archive has been compressed using the "gzip" program (similar to zip or Winzip). tar does not, by itself, compress; it only "wraps" multiple files into a single archive file, hence the subsequent use of gzip to actually compress that archive.

If your distro supports the use of RPMs (Redhat and Mandrake do),you have a couple of choices:

- Your distro will include one or more installation program which you can use from within the GUI. These can vary depending on the desktop environment you use, but GnoRPM, KPackage, Software Manager and Package Manager are a few.

- Any rpm package can be installed from the command line using the "rpm" command. If you're not at the command line, open a terminal window and type "rpm -ivh filename" (no quotes). This will install the package and give you some on-screen feedback as the intallation progresses. Read the rpm man pages for more info on usage.

For .tar.gz or .tgz files, you can accomplish both the decompression and the extraction of the tarball (a common term for a .tar, .tar.gz, or .tgz file) using the GNU version of the "tar" command (which is probably the version included with your distro). For example, to uncompress and extract a file, type the following at a prompt:
tar xzvf filename. The "z" option will run the file through gzip/gunzip first (assuming you've installed gzip), and then extract the files in the tar archive. Once you've done that, look for a README or some instruction file which should tell you how to proceed from there.

Read the following link from RH's support site for more RH 9-specific info on the subject and repost if you have further questions:

http://www.redhat.com/docs/manuals/linux/RHL-9-Manual/custom-guide/ch-graphical-rpm.html

[kc0arf]

Hello,

Welcome to RedHat! I hope you enjoy the switch.

Generally, to install a package, you have to be logged in as root (you are not using the root account for everything, are you? If you are, bad move, and ask how to make a normal user!)

General format for the package installer under Red Hat is:

rpm -i packagename

If you are trying to update a package, you may need:

rpm -i --upgrade packagename

If you have a bunch of dependancy failures, you need to check out apt-get, but that is a different lesson.

To answer your second question, to change Desktops, go to your Redhat menu, then System Tools --> More System Tools --> Desktop Switcher Tool.

I think you are going to find out that GNOME is better than KDE, but I encourage you to form your own opinion.

Take care, and let us know!

Christian

[Nemesis]

I did what instructions you told me but when I get to ./configure it gives me a error
I am trying to install Xine media Player.

[kc0arf]

Hello,

Ok. You are trying to compile the program, and not using a package (rpm). What was the error message? Were you lacking some needed libraries? Perhaps you don't have the compilers installed.

Let us know,

Christian

[Nemesis]

I am going to switch back to linux and do it again and will put what it says. I am currently in Windows. Another question how do I put all my music that I have from windows to linux. I have removable drives so I left all my music on one and put linux as master but I am not sure how to access that drive.

[Nemesis]

nemesis@localhost nemesis]$ cd xine-lib-1-rc5
[nemesis@localhost xine-lib-1-rc5]$ ./configure
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... no
checking for cc... no
checking for cc... no
checking for cl... no
configure: error: no acceptable C compiler found in $PATH
See `config.log' for more details.
[nemesis@localhost xine-lib-1-rc5]$

That is what I got when I put that command.

[DMR]

checking for gcc... no
checking for cc... no
checking for cc... no
checking for cl... no

Those errors indicate that you don't have a compiler installed, which you will definitely need when installing a program from source code. You probably also don't have the necessary kernel source/kernel header packages installed either (which you will also need when compiling from source).

The compilers and kernel files should be available on your RH CDs and installble from whatever Package Manager you use. In RH 9.0, go to the "Red Hat" taskbar button->System Settings->Add/Remove Applications option, Look for and install the Development and Kernel Development tools.

As for the issue of the removable drive and your music:

How is the drive formatted (NTFS, FAT, ext2, ext3, etc.)?
Where is the drive located on you IDE chain (primary slave, secondary master, etc.)?

[kc0arf]

Hello,

Yup. Compiler problem. WIth that in mind, you might wish to re-install linux, to avoid a lot of dependancy issues. If you have data already on the computer, this might not be the best option.... but if you are just starting out, you might want to go and put the install disks back in there, and have at it.

If that is the case, please let us know, and we can help you with suggested packages. You might also need some partition help too.

To answer DMR's question, type in

df

and post that information for us. It will tell you all of your partitions that are in use of the system.

I hope this exposure to Linux is not souring your opinion of it... the best way to learn is to DO and experience!

Christian

[DMR]

Hey Christian,

I've never had a dependency issue when installing the development/kernel packages from the install CDs. Additionally, those packages are not included in the standard/workstation default install options in Red Hat, so a reinstall, unless done in custom/expert mode (and specifically choosing the development packages) won't do the trick. For some weird reason, RedHat (among other distros) doesn't consider the compiler/kernel packages to be essential... go figure. :?:

[kc0arf]

Hi,

I have *never* done the pre-packaged install. Always choose custom, so that I know what is going on there, and have the chance to kill off things that I won't need, such as a network news server, or chinese characters. I am a big fan of installing what I directly need. I do think in the future though, to install a lot of services, and then deactivate them because they are not required (such as pcmcia on a workstation).

Interesting side note. Would have never seen it, as I always go custom. And when I can, I get the programming and the kernel stuff too. You just never know when you need to do a compile... I did one tonight to get gaim upgraded. The rpm worked fine, but I needed to compile a spell checking library first. Just never know.

Christian

[Nemesis]

Ok I installed the packages and it started to work. A whole mess came out from there. I followed the instructions for the Xine player and now I am stuck.
:eek: :eek: :eek:

xpensive-optimizations -fschedule-insns2 -fno-strict-aliasing -ffast-math -funroll-loops -finline-functions -Wall -DNDEBUG -D_REENTRANT -D_FILE_OFFSET_BITS=64 -DXINE_COMPILE -Wpointer-arith -Wnested-externs -Wcast-align -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes -o xineplug_post_visualizations.la -rpath /usr/local/lib/xine/plugins/1.0.0/post -avoid-version -module -lm visualizations.lo fft.lo fftscope.lo oscope.lo fftgraph.lo ../../../src/xine-engine/libxine.la )
gcc -shared .libs/visualizations.o .libs/fft.o .libs/fftscope.o .libs/oscope.o .libs/fftgraph.o -Wl,--rpath -Wl,/usr/local/lib -lm -L/usr/local/lib -lxine -mcpu=pentiumpro -mpreferred-stack-boundary=2 -Wl,-soname -Wl,xineplug_post_visualizations.so -o .libs/xineplug_post_visualizations.so
/usr/bin/install -c .libs/xineplug_post_visualizations.soT /usr/local/lib/xine/plugins/1.0.0/post/xineplug_post_visualizations.so
PATH="$PATH:/sbin" ldconfig -n /usr/local/lib/xine/plugins/1.0.0/post
make install-data-hook
make[5]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/post/visualizations'
make[5]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/post/visualizations'
make[4]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/post/visualizations'
make[3]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/post/visualizations'
Making install in mosaico
make[3]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/post/mosaico'
make[4]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/post/mosaico'
/bin/sh ../../../mkinstalldirs /usr/local/lib/xine/plugins/1.0.0/post
/bin/sh ../../../libtool-nofpic --mode=install /usr/bin/install -c xineplug_post_mosaico.la /usr/local/lib/xine/plugins/1.0.0/post/xineplug_post_mosaico.la
libtool-nofpic: install: warning: relinking `xineplug_post_mosaico.la'
(cd /home/nemesis/xine-lib-1-rc5/src/post/mosaico; /bin/sh ../../../libtool-nofpic --mode=relink gcc -mcpu=pentiumpro -O3 -pipe -fomit-frame-pointer -falign-functions=4 -falign-loops=4 -falign-jumps=4 -mpreferred-stack-boundary=2 -fexpensive-optimizations -fschedule-insns2 -fno-strict-aliasing -ffast-math -funroll-loops -finline-functions -Wall -DNDEBUG -D_REENTRANT -D_FILE_OFFSET_BITS=64 -DXINE_COMPILE -Wpointer-arith -Wnested-externs -Wcast-align -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes -o xineplug_post_mosaico.la -rpath /usr/local/lib/xine/plugins/1.0.0/post -avoid-version -module mosaico.lo ../../../src/xine-engine/libxine.la )
gcc -shared .libs/mosaico.o -Wl,--rpath -Wl,/usr/local/lib -L/usr/local/lib -lxine -mcpu=pentiumpro -mpreferred-stack-boundary=2 -Wl,-soname -Wl,xineplug_post_mosaico.so -o .libs/xineplug_post_mosaico.so
/usr/bin/install -c .libs/xineplug_post_mosaico.soT /usr/local/lib/xine/plugins/1.0.0/post/xineplug_post_mosaico.so
PATH="$PATH:/sbin" ldconfig -n /usr/local/lib/xine/plugins/1.0.0/post
/bin/sh ../../../libtool-nofpic --mode=install /usr/bin/install -c xineplug_post_switch.la /usr/local/lib/xine/plugins/1.0.0/post/xineplug_post_switch.la
libtool-nofpic: install: warning: relinking `xineplug_post_switch.la'
(cd /home/nemesis/xine-lib-1-rc5/src/post/mosaico; /bin/sh ../../../libtool-nofpic --mode=relink gcc -mcpu=pentiumpro -O3 -pipe -fomit-frame-pointer -falign-functions=4 -falign-loops=4 -falign-jumps=4 -mpreferred-stack-boundary=2 -fexpensive-optimizations -fschedule-insns2 -fno-strict-aliasing -ffast-math -funroll-loops -finline-functions -Wall -DNDEBUG -D_REENTRANT -D_FILE_OFFSET_BITS=64 -DXINE_COMPILE -Wpointer-arith -Wnested-externs -Wcast-align -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes -o xineplug_post_switch.la -rpath /usr/local/lib/xine/plugins/1.0.0/post -avoid-version -module switch.lo ../../../src/xine-engine/libxine.la )
gcc -shared .libs/switch.o -Wl,--rpath -Wl,/usr/local/lib -L/usr/local/lib -lxine -mcpu=pentiumpro -mpreferred-stack-boundary=2 -Wl,-soname -Wl,xineplug_post_switch.so -o .libs/xineplug_post_switch.so
/usr/bin/install -c .libs/xineplug_post_switch.soT /usr/local/lib/xine/plugins/1.0.0/post/xineplug_post_switch.so
PATH="$PATH:/sbin" ldconfig -n /usr/local/lib/xine/plugins/1.0.0/post
make install-data-hook
make[5]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/post/mosaico'
make[5]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/post/mosaico'
make[4]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/post/mosaico'
make[3]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/post/mosaico'
Making install in deinterlace
make[3]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/post/deinterlace'
Making install in plugins
make[4]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/post/deinterlace/plugins'
make[5]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/post/deinterlace/plugins'
make[5]: Nothing to be done for `install-exec-am'.
make install-data-hook
make[6]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/post/deinterlace/plugins'
make[6]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/post/deinterlace/plugins'
make[5]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/post/deinterlace/plugins'
make[4]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/post/deinterlace/plugins'
make[4]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/post/deinterlace'
make[5]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/post/deinterlace'
/bin/sh ../../../mkinstalldirs /usr/local/lib/xine/plugins/1.0.0/post
/bin/sh ../../../libtool-nofpic --mode=install /usr/bin/install -c xineplug_post_tvtime.la /usr/local/lib/xine/plugins/1.0.0/post/xineplug_post_tvtime.la
libtool-nofpic: install: warning: relinking `xineplug_post_tvtime.la'
(cd /home/nemesis/xine-lib-1-rc5/src/post/deinterlace; /bin/sh ../../../libtool-nofpic --mode=relink gcc -mcpu=pentiumpro -O3 -pipe -fomit-frame-pointer -falign-functions=4 -falign-loops=4 -falign-jumps=4 -mpreferred-stack-boundary=2 -fexpensive-optimizations -fschedule-insns2 -fno-strict-aliasing -ffast-math -funroll-loops -finline-functions -Wall -DNDEBUG -D_REENTRANT -D_FILE_OFFSET_BITS=64 -DXINE_COMPILE -Wpointer-arith -Wnested-externs -Wcast-align -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes -o xineplug_post_tvtime.la -rpath /usr/local/lib/xine/plugins/1.0.0/post -avoid-version -module xine_plugin.lo deinterlace.lo pulldown.lo speedy.lo tvtime.lo ../../../src/xine-engine/libxine.la ../../../src/post/deinterlace/plugins/libdeinterlaceplugins.la )
gcc -shared .libs/xine_plugin.o .libs/deinterlace.o .libs/pulldown.o .libs/speedy.o .libs/tvtime.o -Wl,--whole-archive ../../../src/post/deinterlace/plugins/.libs/libdeinterlaceplugins.a -Wl,--no-whole-archive -Wl,--rpath -Wl,/usr/local/lib -L/usr/local/lib -lxine -ldl -lz -lm -lpthread -mcpu=pentiumpro -mpreferred-stack-boundary=2 -Wl,-soname -Wl,xineplug_post_tvtime.so -o .libs/xineplug_post_tvtime.so
/usr/bin/install -c .libs/xineplug_post_tvtime.soT /usr/local/lib/xine/plugins/1.0.0/post/xineplug_post_tvtime.so
PATH="$PATH:/sbin" ldconfig -n /usr/local/lib/xine/plugins/1.0.0/post
make install-data-hook
make[6]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/post/deinterlace'
make[6]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/post/deinterlace'
make[5]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/post/deinterlace'
make[4]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/post/deinterlace'
make[3]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/post/deinterlace'
Making install in audio
make[3]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/post/audio'
make[4]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/post/audio'
/bin/sh ../../../mkinstalldirs /usr/local/lib/xine/plugins/1.0.0/post
/bin/sh ../../../libtool-nofpic --mode=install /usr/bin/install -c xineplug_post_audio_filter_upmix.la /usr/local/lib/xine/plugins/1.0.0/post/xineplug_post_audio_filter_upmix.la
libtool-nofpic: install: warning: relinking `xineplug_post_audio_filter_upmix.la'
(cd /home/nemesis/xine-lib-1-rc5/src/post/audio; /bin/sh ../../../libtool-nofpic --mode=relink gcc -mcpu=pentiumpro -O3 -pipe -fomit-frame-pointer -falign-functions=4 -falign-loops=4 -falign-jumps=4 -mpreferred-stack-boundary=2 -fexpensive-optimizations -fschedule-insns2 -fno-strict-aliasing -ffast-math -funroll-loops -finline-functions -Wall -DNDEBUG -D_REENTRANT -D_FILE_OFFSET_BITS=64 -DXINE_COMPILE -Wpointer-arith -Wnested-externs -Wcast-align -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes -o xineplug_post_audio_filter_upmix.la -rpath /usr/local/lib/xine/plugins/1.0.0/post -avoid-version -module -lm upmix.lo filter.lo window.lo ../../../src/xine-engine/libxine.la )
gcc -shared .libs/upmix.o .libs/filter.o .libs/window.o -Wl,--rpath -Wl,/usr/local/lib -lm -L/usr/local/lib -lxine -mcpu=pentiumpro -mpreferred-stack-boundary=2 -Wl,-soname -Wl,xineplug_post_audio_filter_upmix.so -o .libs/xineplug_post_audio_filter_upmix.so
/usr/bin/install -c .libs/xineplug_post_audio_filter_upmix.soT /usr/local/lib/xine/plugins/1.0.0/post/xineplug_post_audio_filter_upmix.so
PATH="$PATH:/sbin" ldconfig -n /usr/local/lib/xine/plugins/1.0.0/post
make install-data-hook
make[5]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/post/audio'
make[5]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/post/audio'
make[4]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/post/audio'
make[3]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/post/audio'
make[3]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/post'
make[4]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/post'
make[4]: Nothing to be done for `install-exec-am'.
make install-data-hook
make[5]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/post'
make[5]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/post'
make[4]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/post'
make[3]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/post'
make[2]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/post'
make[2]: Entering directory `/home/nemesis/xine-lib-1-rc5/src'
make[3]: Entering directory `/home/nemesis/xine-lib-1-rc5/src'
make[3]: Nothing to be done for `install-exec-am'.
make install-data-hook
make[4]: Entering directory `/home/nemesis/xine-lib-1-rc5/src'
make[4]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src'
make[3]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src'
make[2]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src'
make[1]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src'
make[1]: Entering directory `/home/nemesis/xine-lib-1-rc5'
make[2]: Entering directory `/home/nemesis/xine-lib-1-rc5'
make[2]: Nothing to be done for `install-exec-am'.
make install-data-hook
make[3]: Entering directory `/home/nemesis/xine-lib-1-rc5'
make[3]: Leaving directory `/home/nemesis/xine-lib-1-rc5'
make[2]: Leaving directory `/home/nemesis/xine-lib-1-rc5'
make[1]: Leaving directory `/home/nemesis/xine-lib-1-rc5'
[root@localhost xine-lib-1-rc5]# make clean
Making clean in src
make[1]: Entering directory `/home/nemesis/xine-lib-1-rc5/src'
Making clean in post
make[2]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/post'
Making clean in audio
make[3]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/post/audio'
test -z "xineplug_post_audio_filter_upmix.la" || rm -f xineplug_post_audio_filter_upmix.la
rm -f "./so_locations"
rm -rf .libs _libs
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[3]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/post/audio'
Making clean in deinterlace
make[3]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/post/deinterlace'
Making clean in plugins
make[4]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/post/deinterlace/plugins'
rm -rf .libs _libs
test -z "libdeinterlaceplugins.la" || rm -f libdeinterlaceplugins.la
rm -f "./so_locations"
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[4]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/post/deinterlace/plugins'
Making clean in .
make[4]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/post/deinterlace'
test -z "xineplug_post_tvtime.la" || rm -f xineplug_post_tvtime.la
rm -f "./so_locations"
rm -rf .libs _libs
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[4]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/post/deinterlace'
make[3]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/post/deinterlace'
Making clean in mosaico
make[3]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/post/mosaico'
test -z "xineplug_post_mosaico.la xineplug_post_switch.la" || rm -f xineplug_post_mosaico.la xineplug_post_switch.la
rm -f "./so_locations"
rm -f "./so_locations"
rm -rf .libs _libs
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[3]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/post/mosaico'
Making clean in visualizations
make[3]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/post/visualizations'
test -z "xineplug_post_visualizations.la" || rm -f xineplug_post_visualizations.la
rm -f "./so_locations"
rm -rf .libs _libs
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[3]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/post/visualizations'
Making clean in goom
make[3]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/post/goom'
test -z "xineplug_post_goom.la" || rm -f xineplug_post_goom.la
rm -f "./so_locations"
rm -rf .libs _libs
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[3]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/post/goom'
Making clean in planar
make[3]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/post/planar'
test -z "xineplug_post_planar.la" || rm -f xineplug_post_planar.la
rm -f "./so_locations"
rm -rf .libs _libs
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[3]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/post/planar'
Making clean in .
make[3]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/post'
rm -rf .libs _libs
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[3]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/post'
make[2]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/post'
Making clean in libflac
make[2]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/libflac'
test -z "" || rm -f
rm -rf .libs _libs
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[2]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/libflac'
Making clean in libfaad
make[2]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/libfaad'
Making clean in codebook
make[3]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/libfaad/codebook'
rm -rf .libs _libs
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[3]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/libfaad/codebook'
Making clean in .
make[3]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/libfaad'
test -z "xineplug_decode_faad.la" || rm -f xineplug_decode_faad.la
rm -f "./so_locations"
rm -rf .libs _libs
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[3]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/libfaad'
make[2]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/libfaad'
Making clean in libreal
make[2]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/libreal'
test -z "xineplug_decode_real.la xineplug_decode_real_audio.la" || rm -f xineplug_decode_real.la xineplug_decode_real_audio.la
rm -f "./so_locations"
rm -f "./so_locations"
rm -rf .libs _libs
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[2]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/libreal'
Making clean in libspeex
make[2]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/libspeex'
test -z "" || rm -f
rm -rf .libs _libs
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[2]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/libspeex'
Making clean in libtheora
make[2]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/libtheora'
test -z "" || rm -f
rm -rf .libs _libs
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[2]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/libtheora'
Making clean in libvorbis
make[2]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/libvorbis'
test -z "xineplug_decode_vorbis.la" || rm -f xineplug_decode_vorbis.la
rm -f "./so_locations"
rm -rf .libs _libs
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[2]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/libvorbis'
Making clean in libxineadec
make[2]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/libxineadec'
Making clean in nosefart
make[3]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/libxineadec/nosefart'
rm -rf .libs _libs
test -z "libnosefart.la" || rm -f libnosefart.la
rm -f "./so_locations"
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[3]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/libxineadec/nosefart'
Making clean in gsm610
make[3]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/libxineadec/gsm610'
rm -rf .libs _libs
test -z "libgsm610.la" || rm -f libgsm610.la
rm -f "./so_locations"
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[3]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/libxineadec/gsm610'
Making clean in .
make[3]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/libxineadec'
test -z "xineplug_decode_gsm610.la xineplug_decode_nsf.la" || rm -f xineplug_decode_gsm610.la xineplug_decode_nsf.la
rm -f "./so_locations"
rm -f "./so_locations"
rm -rf .libs _libs
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[3]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/libxineadec'
make[2]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/libxineadec'
Making clean in libxinevdec
make[2]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/libxinevdec'
test -z " xineplug_decode_bitplane.la xineplug_decode_rgb.la xineplug_decode_yuv.la" || rm -f xineplug_decode_bitplane.la xineplug_decode_rgb.la xineplug_decode_yuv.la
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -rf .libs _libs
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[2]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/libxinevdec'
Making clean in liblpcm
make[2]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/liblpcm'
test -z "xineplug_decode_lpcm.la" || rm -f xineplug_decode_lpcm.la
rm -f "./so_locations"
rm -rf .libs _libs
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[2]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/liblpcm'
Making clean in libw32dll
make[2]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/libw32dll'
Making clean in qtx
make[3]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/libw32dll/qtx'
Making clean in qtxsdk
make[4]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/libw32dll/qtx/qtxsdk'
rm -rf .libs _libs
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[4]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/libw32dll/qtx/qtxsdk'
Making clean in .
make[4]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/libw32dll/qtx'
rm -rf .libs _libs
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[4]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/libw32dll/qtx'
make[3]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/libw32dll/qtx'
Making clean in dmo
make[3]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/libw32dll/dmo'
rm -rf .libs _libs
test -z "libdmo_filter.la" || rm -f libdmo_filter.la
rm -f "./so_locations"
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[3]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/libw32dll/dmo'
Making clean in DirectShow
make[3]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/libw32dll/DirectShow'
rm -rf .libs _libs
test -z "libds_filter.la" || rm -f libds_filter.la
rm -f "./so_locations"
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[3]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/libw32dll/DirectShow'
Making clean in wine
make[3]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/libw32dll/wine'
rm -rf .libs _libs
test -z "libwine.la" || rm -f libwine.la
rm -f "./so_locations"
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[3]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/libw32dll/wine'
Making clean in .
make[3]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/libw32dll'
test -z "xineplug_decode_w32dll.la xineplug_decode_qt.la" || rm -f xineplug_decode_w32dll.la xineplug_decode_qt.la
rm -f "./so_locations"
rm -f "./so_locations"
rm -rf .libs _libs
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[3]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/libw32dll'
make[2]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/libw32dll'
Making clean in libmad
make[2]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/libmad'
test -z "xineplug_decode_mad.la" || rm -f xineplug_decode_mad.la
rm -f "./so_locations"
rm -rf .libs _libs
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[2]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/libmad'
Making clean in libdts
make[2]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/libdts'
test -z "xineplug_decode_dts.la" || rm -f xineplug_decode_dts.la
rm -f "./so_locations"
rm -rf .libs _libs
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[2]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/libdts'
Making clean in libsputext
make[2]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/libsputext'
test -z "xineplug_decode_sputext.la xineplug_dmx_sputext.la" || rm -f xineplug_decode_sputext.la xineplug_dmx_sputext.la
rm -f "./so_locations"
rm -f "./so_locations"
rm -rf .libs _libs
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[2]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/libsputext'
Making clean in libspucc
make[2]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/libspucc'
test -z "xineplug_decode_spucc.la" || rm -f xineplug_decode_spucc.la
rm -f "./so_locations"
rm -rf .libs _libs
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[2]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/libspucc'
Making clean in libspudec
make[2]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/libspudec'
test -z "xineplug_decode_spu.la" || rm -f xineplug_decode_spu.la
rm -f "./so_locations"
rm -rf .libs _libs
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[2]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/libspudec'
Making clean in liba52
make[2]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/liba52'
test -z "xineplug_decode_a52.la" || rm -f xineplug_decode_a52.la
rm -f "./so_locations"
rm -rf .libs _libs
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[2]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/liba52'
Making clean in libmpeg2
make[2]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/libmpeg2'
test -z "xineplug_decode_mpeg2.la" || rm -f xineplug_decode_mpeg2.la
rm -f "./so_locations"
rm -rf .libs _libs
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[2]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/libmpeg2'
Making clean in libffmpeg
make[2]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/libffmpeg'
Making clean in libavcodec
make[3]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/libffmpeg/libavcodec'
Making clean in libpostproc
make[4]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/libffmpeg/libavcodec/libpostproc'
rm -rf .libs _libs
test -z "libpostprocess.la" || rm -f libpostprocess.la
rm -f "./so_locations"
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[4]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/libffmpeg/libavcodec/libpostproc'
Making clean in sparc
make[4]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/libffmpeg/libavcodec/sparc'
rm -rf .libs _libs
test -z "libavcodec_sparc.la" || rm -f libavcodec_sparc.la
rm -f "./so_locations"
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[4]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/libffmpeg/libavcodec/sparc'
Making clean in ppc
make[4]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/libffmpeg/libavcodec/ppc'
rm -rf .libs _libs
test -z "libavcodec_ppc.la" || rm -f libavcodec_ppc.la
rm -f "./so_locations"
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[4]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/libffmpeg/libavcodec/ppc'
Making clean in alpha
make[4]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/libffmpeg/libavcodec/alpha'
rm -rf .libs _libs
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[4]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/libffmpeg/libavcodec/alpha'
Making clean in mlib
make[4]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/libffmpeg/libavcodec/mlib'
rm -rf .libs _libs
test -z "libavcodec_mlib.la" || rm -f libavcodec_mlib.la
rm -f "./so_locations"
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[4]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/libffmpeg/libavcodec/mlib'
Making clean in i386
make[4]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/libffmpeg/libavcodec/i386'
rm -rf .libs _libs
test -z "libavcodec_mmx.la" || rm -f libavcodec_mmx.la
rm -f "./so_locations"
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[4]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/libffmpeg/libavcodec/i386'
Making clean in armv4l
make[4]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/libffmpeg/libavcodec/armv4l'
rm -rf .libs _libs
test -z "libavcodec_armv4l.la" || rm -f libavcodec_armv4l.la
rm -f "./so_locations"
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[4]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/libffmpeg/libavcodec/armv4l'
Making clean in .
make[4]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/libffmpeg/libavcodec'
rm -rf .libs _libs
test -z "libavcodec.la" || rm -f libavcodec.la
rm -f "./so_locations"
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[4]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/libffmpeg/libavcodec'
make[3]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/libffmpeg/libavcodec'
Making clean in .
make[3]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/libffmpeg'
test -z "xineplug_decode_ff.la xineplug_decode_dvaudio.la" || rm -f xineplug_decode_ff.la xineplug_decode_dvaudio.la
rm -f "./so_locations"
rm -f "./so_locations"
rm -rf .libs _libs
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[3]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/libffmpeg'
make[2]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/libffmpeg'
Making clean in demuxers
make[2]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/demuxers'
test -z "xineplug_dmx_ogg.la xineplug_dmx_asf.la xineplug_dmx_games.la xineplug_dmx_audio.la xineplug_dmx_mpeg_ts.la xineplug_dmx_avi.la xineplug_dmx_mpeg_block.la xineplug_dmx_mpeg.la xineplug_dmx_mpeg_elem.la xineplug_dmx_mpeg_pes.la xineplug_dmx_qt.la xineplug_dmx_fli.la xineplug_dmx_yuv4mpeg2.la xineplug_dmx_real.la xineplug_dmx_rawdv.la xineplug_dmx_pva.la xineplug_dmx_yuv_frames.la xineplug_dmx_slave.la xineplug_dmx_nsv.la xineplug_dmx_matroska.la xineplug_dmx_iff.la xineplug_dmx_flv.la " || rm -f xineplug_dmx_ogg.la xineplug_dmx_asf.la xineplug_dmx_games.la xineplug_dmx_audio.la xineplug_dmx_mpeg_ts.la xineplug_dmx_avi.la xineplug_dmx_mpeg_block.la xineplug_dmx_mpeg.la xineplug_dmx_mpeg_elem.la xineplug_dmx_mpeg_pes.la xineplug_dmx_qt.la xineplug_dmx_fli.la xineplug_dmx_yuv4mpeg2.la xineplug_dmx_real.la xineplug_dmx_rawdv.la xineplug_dmx_pva.la xineplug_dmx_yuv_frames.la xineplug_dmx_slave.la xineplug_dmx_nsv.la xineplug_dmx_matroska.la xineplug_dmx_iff.la xineplug_dmx_flv.la
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -rf .libs _libs
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[2]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/demuxers'
Making clean in input
make[2]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/input'
Making clean in libdvdnav
make[3]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/input/libdvdnav'
rm -rf .libs _libs
test -z "libdvdnav.la" || rm -f libdvdnav.la
rm -f "./so_locations"
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[3]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/input/libdvdnav'
Making clean in librtsp
make[3]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/input/librtsp'
rm -rf .libs _libs
test -z "librtsp.la" || rm -f librtsp.la
rm -f "./so_locations"
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[3]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/input/librtsp'
Making clean in libreal
make[3]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/input/libreal'
rm -rf .libs _libs
test -z "libreal.la" || rm -f libreal.la
rm -f "./so_locations"
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[3]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/input/libreal'
Making clean in dvb
make[3]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/input/dvb'
rm -rf .libs _libs
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[3]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/input/dvb'
Making clean in vcd
make[3]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/input/vcd'
Making clean in libvcd
make[4]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/input/vcd/libvcd'
Making clean in libvcd
make[5]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/input/vcd/libvcd/libvcd'
rm -rf .libs _libs
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[5]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/input/vcd/libvcd/libvcd'
Making clean in .
make[5]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/input/vcd/libvcd'
rm -rf .libs _libs
test -z "libvcd.la libvcdinfo.la" || rm -f libvcd.la libvcdinfo.la
rm -f "./so_locations"
rm -f "./so_locations"
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[5]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/input/vcd/libvcd'
make[4]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/input/vcd/libvcd'
Making clean in libcdio
make[4]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/input/vcd/libcdio'
Making clean in image
make[5]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/input/vcd/libcdio/image'
rm -rf .libs _libs
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[5]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/input/vcd/libcdio/image'
Making clean in MSWindows
make[5]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/input/vcd/libcdio/MSWindows'
rm -rf .libs _libs
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[5]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/input/vcd/libcdio/MSWindows'
Making clean in cdio
make[5]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/input/vcd/libcdio/cdio'
rm -rf .libs _libs
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[5]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/input/vcd/libcdio/cdio'
Making clean in .
make[5]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/input/vcd/libcdio'
rm -rf .libs _libs
test -z "libcdio.la libiso9660.la" || rm -f libcdio.la libiso9660.la
rm -f "./so_locations"
rm -f "./so_locations"
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[5]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/input/vcd/libcdio'
make[4]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/input/vcd/libcdio'
Making clean in .
make[4]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/input/vcd'
test -z "xineplug_inp_vcd.la" || rm -f xineplug_inp_vcd.la
rm -f "./so_locations"
rm -rf .libs _libs
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[4]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/input/vcd'
make[3]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/input/vcd'
Making clean in .
make[3]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/input'
test -z "xineplug_inp_file.la xineplug_inp_http.la xineplug_inp_dvd.la xineplug_inp_vcdo.la xineplug_inp_v4l.la xineplug_inp_mms.la xineplug_inp_stdin_fifo.la xineplug_inp_pnm.la xineplug_inp_rtp.la xineplug_inp_rtsp.la xineplug_inp_net.la xineplug_inp_pvr.la xineplug_inp_dvb.la xineplug_inp_cdda.la" || rm -f xineplug_inp_file.la xineplug_inp_http.la xineplug_inp_dvd.la xineplug_inp_vcdo.la xineplug_inp_v4l.la xineplug_inp_mms.la xineplug_inp_stdin_fifo.la xineplug_inp_pnm.la xineplug_inp_rtp.la xineplug_inp_rtsp.la xineplug_inp_net.la xineplug_inp_pvr.la xineplug_inp_dvb.la xineplug_inp_cdda.la
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -rf .libs _libs
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[3]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/input'
make[2]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/input'
Making clean in dxr3
make[2]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/dxr3'
test -z "xineplug_decode_dxr3_video.la xineplug_decode_dxr3_spu.la xineplug_vo_out_dxr3.la " || rm -f xineplug_decode_dxr3_video.la xineplug_decode_dxr3_spu.la xineplug_vo_out_dxr3.la
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -rf .libs _libs
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[2]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/dxr3'
Making clean in video_out
make[2]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/video_out'
Making clean in macosx
make[3]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/video_out/macosx'
test -z "" || rm -f
rm -rf .libs _libs
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[3]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/video_out/macosx'
Making clean in vidix
make[3]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/video_out/vidix'
Making clean in drivers
make[4]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/video_out/vidix/drivers'
test -z "mach64_vid.la mga_crtc2_vid.la mga_vid.la pm2_vid.la pm3_vid.la radeon_vid.la rage128_vid.la cyberblade_vid.la sis_vid.la" || rm -f mach64_vid.la mga_crtc2_vid.la mga_vid.la pm2_vid.la pm3_vid.la radeon_vid.la rage128_vid.la cyberblade_vid.la sis_vid.la
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -rf .libs _libs
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[4]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/video_out/vidix/drivers'
Making clean in .
make[4]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/video_out/vidix'
rm -rf .libs _libs
test -z "libvidix.la" || rm -f libvidix.la
rm -f "./so_locations"
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[4]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/video_out/vidix'
make[3]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/video_out/vidix'
Making clean in libdha
make[3]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/video_out/libdha'
Making clean in sysdep
make[4]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/video_out/libdha/sysdep'
rm -rf .libs _libs
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[4]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/video_out/libdha/sysdep'
Making clean in oth
make[4]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/video_out/libdha/oth'
rm -rf .libs _libs
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[4]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/video_out/libdha/oth'
Making clean in kernelhelper
make[4]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/video_out/libdha/kernelhelper'
rm -rf .libs _libs
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[4]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/video_out/libdha/kernelhelper'
Making clean in bin
make[4]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/video_out/libdha/bin'
rm -rf .libs _libs
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[4]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/video_out/libdha/bin'
Making clean in .
make[4]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/video_out/libdha'
rm -rf .libs _libs
test -z "libdha.la" || rm -f libdha.la
rm -f "./so_locations"
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[4]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/video_out/libdha'
make[3]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/video_out/libdha'
Making clean in .
make[3]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/video_out'
test -z " xineplug_vo_out_vidix.la xineplug_vo_out_fb.la xineplug_vo_out_none.la" || rm -f xineplug_vo_out_vidix.la xineplug_vo_out_fb.la xineplug_vo_out_none.la
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -rf .libs _libs
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[3]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/video_out'
make[2]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/video_out'
Making clean in audio_out
make[2]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/audio_out'
test -z "xineplug_ao_out_none.la xineplug_ao_out_file.la xineplug_ao_out_oss.la " || rm -f xineplug_ao_out_none.la xineplug_ao_out_file.la xineplug_ao_out_oss.la
rm -f "./so_locations"
rm -f "./so_locations"
rm -f "./so_locations"
rm -rf .libs _libs
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[2]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/audio_out'
Making clean in xine-engine
make[2]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/xine-engine'
test -z "libxine.la" || rm -f libxine.la
rm -f "./so_locations"
rm -rf .libs _libs
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[2]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/xine-engine'
Making clean in xine-utils
make[2]: Entering directory `/home/nemesis/xine-lib-1-rc5/src/xine-utils'
rm -rf .libs _libs
test -z "libxineutils.la" || rm -f libxineutils.la
rm -f "./so_locations"
rm -f *.o core *.core
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[2]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src/xine-utils'
Making clean in .
make[2]: Entering directory `/home/nemesis/xine-lib-1-rc5/src'
rm -rf .libs _libs
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[2]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src'
make[1]: Leaving directory `/home/nemesis/xine-lib-1-rc5/src'
Making clean in include
make[1]: Entering directory `/home/nemesis/xine-lib-1-rc5/include'
rm -rf .libs _libs
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[1]: Leaving directory `/home/nemesis/xine-lib-1-rc5/include'
Making clean in misc
make[1]: Entering directory `/home/nemesis/xine-lib-1-rc5/misc'
Making clean in fonts
make[2]: Entering directory `/home/nemesis/xine-lib-1-rc5/misc/fonts'
rm -rf .libs _libs
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[2]: Leaving directory `/home/nemesis/xine-lib-1-rc5/misc/fonts'
Making clean in .
make[2]: Entering directory `/home/nemesis/xine-lib-1-rc5/misc'
rm -rf .libs _libs
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[2]: Leaving directory `/home/nemesis/xine-lib-1-rc5/misc'
make[1]: Leaving directory `/home/nemesis/xine-lib-1-rc5/misc'
Making clean in po
make[1]: Entering directory `/home/nemesis/xine-lib-1-rc5/po'
rm -f core core.* *.pox xine-lib.po *.new.po
rm -fr *.o *~ \#* .*~ .\#*
make[1]: Leaving directory `/home/nemesis/xine-lib-1-rc5/po'
Making clean in intl
make[1]: Entering directory `/home/nemesis/xine-lib-1-rc5/intl'
rm -f *.a *.la *.o *.lo core core.* *~ \#* .*~ .\#*
rm -f libintl.h charset.alias ref-add.sed ref-del.sed
rm -f -r .libs _libs
make[1]: Leaving directory `/home/nemesis/xine-lib-1-rc5/intl'
Making clean in m4
make[1]: Entering directory `/home/nemesis/xine-lib-1-rc5/m4'
rm -rf .libs _libs
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[1]: Leaving directory `/home/nemesis/xine-lib-1-rc5/m4'
Making clean in doc
make[1]: Entering directory `/home/nemesis/xine-lib-1-rc5/doc'
Making clean in faq
make[2]: Entering directory `/home/nemesis/xine-lib-1-rc5/doc/faq'
rm -rf .libs _libs
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[2]: Leaving directory `/home/nemesis/xine-lib-1-rc5/doc/faq'
Making clean in hackersguide
make[2]: Entering directory `/home/nemesis/xine-lib-1-rc5/doc/hackersguide'
rm -rf .libs _libs
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[2]: Leaving directory `/home/nemesis/xine-lib-1-rc5/doc/hackersguide'
Making clean in man
make[2]: Entering directory `/home/nemesis/xine-lib-1-rc5/doc/man'
Making clean in en
make[3]: Entering directory `/home/nemesis/xine-lib-1-rc5/doc/man/en'
rm -rf .libs _libs
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[3]: Leaving directory `/home/nemesis/xine-lib-1-rc5/doc/man/en'
Making clean in .
make[3]: Entering directory `/home/nemesis/xine-lib-1-rc5/doc/man'
rm -rf .libs _libs
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[3]: Leaving directory `/home/nemesis/xine-lib-1-rc5/doc/man'
make[2]: Leaving directory `/home/nemesis/xine-lib-1-rc5/doc/man'
Making clean in .
make[2]: Entering directory `/home/nemesis/xine-lib-1-rc5/doc'
rm -rf .libs _libs
rm -f *~ \#* .*~ .\#*
rm -f *.lo
make[2]: Leaving directory `/home/nemesis/xine-lib-1-rc5/doc'
make[1]: Leaving directory `/home/nemesis/xine-lib-1-rc5/doc'
Making clean in .
make[1]: Entering directory `/home/nemesis/xine-lib-1-rc5'
rm -rf .libs _libs
rm -f *~ \#* .*~ .\#*
rm -f xine-lib_1-rc5.tar.gz
rm -f xine-lib-1-rc5.tar.gz xine-lib.tgz package_descriptions
rm -rf xine-lib-1-rc5
rm -f *.lo
make[1]: Leaving directory `/home/nemesis/xine-lib-1-rc5'
[root@localhost xine-lib-1-rc5]# /usr/local/bin
bash: /usr/local/bin: is a directory
[root@localhost xine-lib-1-rc5]#

Sorry for so much! :sad:
I have NTFS on a slave HD on IDE1

[DMR]

OK- It looks like the make completed successfully, so you should now have a xine executable in there somewhere.

I don't recall what the actual program's filename will be, but you should be able to find it (and/or documentation for it) in the new xine directory. Once you locate the program you can just create a shortcut to it on your desktop or in your Programs menu

[Nemesis]

I did a search and came up with a few directories with the name XINE and I can not find any thing that would open the player. I also want to know how to get those files from the NTFS slave on IDE1. I am dying to leave Windows for awhile.

[DMR]

Linux can read/copy files from NTFS filesystems, but the Linux NTFS driver has only (very) limited support for writing to NTFS at this time. More info and possible workaraounds for the write limitations can be found here:

http://linux-ntfs.sourceforge.net/info/ntfs.html#3.1

As for xine, you don't open it with anything; it's an executable program in and of itself. Most executables end up in /bin, /usr/bin, or in /usr/local (I think xine ends up /usr/local; can't verify that now though). To run it from the command line you simply type the filename and hit Enter. As I mentiioned earlier, you can also create a link to it on your desktop.

[kc0arf]

Hello,

I didn't see him do a "make install" which usually places the binaries and the libraries where they need to be. That might be a problem. The program might end up in /usr/local/bin or /usr/local/sbin and there might be config files in /usr/local/etc or /etc

Enjoy!

Christian

[DMR]

Christ, I am truly a muppet sometimes.

You're right Christian- I totally missed that.

[Nemesis]

I found almost all the files and maybe I am just not getting it. I don't know how to run the file or which one. And also about reading the files is all I want to do but how can I mount that drive or even to look at it.

[DMR]

I'm sorry, but I don't know the exact filename of that particular program; is there no documentation on the program which might help you out? Try using the commands below to find it. The commands will search your PATH for executable program names which contain the text you specify (in this case, "xine":

which xine
whereis xine

Linux is case-sensitive, so you might also try those commands using an upper-case "x" as well.

If you're using a graphical "Explorer"-type filemanager you should be able to just click or double-click on the filename to run it. As I said earlier, typing the filename at a command prompt will do the same thing.

In terms of Mounting and viewing your Windows partition, the problem is that Red Hat 9 does not, for some reason, support NTFS filesystems at all by default. You either have to compile NTFS support into your kernel, or use third-party NTFS drivers. The following Google link has more info on the whole issue:

http://www.google.com/linux?hl=en&lr=&ie=UTF-8&q=%22red+hat+9%22+ntfs+support&btnG=Google+Search

[romm]

I have installed RH9 on a box at home and I am really new to this OS. I was wondering if anyone can help me with installing a package manager. I am not really sure what I am doing. Once I figure out how to install this I should be able to continue with installing other applications.
Any help would be nice.
Oh and I was wondering how do I change GUI desktops from GNOME to KDE?

Use Fink from sourceforge to install OSS

[gargi3542]

i wanted to download nemesis for my windows.
i hv downloaded winPcap 2.3 & libNet.dll.
Still its not working.
somebody help me plzzzz