Posts by brynFlew

Hello,

I am having trouble finding a good tutorial on how to install eclipse with aptana radrails on centos, when i try to install radrails in eclipse using the instructions givin here (aptana), i get these errors. Can someone point me in the right direction?

Thanks :)

An error occurred while collecting items to be installed
session context was:(profile=PlatformProfile, phase=org.eclipse.equinox.internal.p2.engine.phases.Collect, operand=, action=).
No repository found containing: osgi.bundle,org.eclipse.ant.core.source,3.2.200.v20100427
No repository found containing: osgi.bundle,org.eclipse.ant.launching,1.0.0.v20100427
No repository found containing: osgi.bundle,org.eclipse.ant.launching.source,1.0.0.v20100427
No repository found containing: osgi.bundle,org.eclipse.ant.ui,3.5.0.v20100427
No repository found containing: osgi.bundle,org.eclipse.ant.ui.source,3.5.0.v20100427
No repository found containing: osgi.bundle,org.eclipse.compare.core.source,3.5.100.I20100526-0800
No repository found containing: osgi.bundle,org.eclipse.compare.source,3.5.100.I20100526-0800
No repository found containing: osgi.bundle,org.eclipse.core.commands.source,3.6.0.I20100512-1500
No repository found containing: osgi.bundle,org.eclipse.core.contenttype.source,3.4.100.v20100505-1235
No repository found containing: osgi.bundle,org.eclipse.core.databinding.beans.source,1.2.100.I20100601-0800
No repository found containing: osgi.bundle,org.eclipse.core.databinding.observable.source,1.3.0.I20100601-0800
No repository found containing: osgi.bundle,org.eclipse.core.databinding.property.source,1.3.0.I20100601-0800
No repository found containing: osgi.bundle,org.eclipse.core.databinding.source,1.3.100.I20100601-0800
No repository found containing: osgi.bundle,org.eclipse.core.expressions.source,3.4.200.v20100505
No repository found containing: osgi.bundle,org.eclipse.core.externaltools.source,1.0.1.v20100831_r361
No repository found containing: osgi.bundle,org.eclipse.core.filebuffers.source,3.5.100.v20100520-0800
No repository found containing: osgi.bundle,org.eclipse.core.filesystem.source,1.3.1.R36x_v20100727-0745
No repository found containing: osgi.bundle,org.eclipse.core.jobs.source,3.5.1.R36x_v20100824
No repository found containing: osgi.bundle,org.eclipse.core.net.source,1.2.100.I20100511-0800
No repository found containing: osgi.bundle,org.eclipse.core.resources.source,3.6.0.R36x_v20100825-0600
No repository found containing: osgi.bundle,org.eclipse.core.runtime.compatibility.auth.source,3.2.200.v20100517
No repository found containing: osgi.bundle,org.eclipse.core.runtime.compatibility.registry.source,3.3.0.v20100520
No repository found containing: osgi.bundle,org.eclipse.core.runtime.compatibility.source,3.2.100.v20100505
No repository found containing: osgi.bundle,org.eclipse.core.runtime.source,3.6.0.v20100505
No repository found containing: osgi.bundle,org.eclipse.core.variables.source,3.2.400.v20100505
No repository found containing: osgi.bundle,org.eclipse.cvs.source,1.0.500.v20100414
No repository found containing: org.eclipse.update.feature,org.eclipse.cvs.source,1.2.0.v20100427-7B77FKt90GE5h0NCO35T7A01911
No repository found containing: osgi.bundle,org.eclipse.debug.core.source,3.6.0.v20100519
No repository found containing: osgi.bundle,org.eclipse.debug.ui.source,3.6.1.v20100901_r361
No repository found containing: osgi.bundle,org.eclipse.ecf.filetransfer.source,4.0.0.201110251336
No repository found containing: osgi.bundle,org.eclipse.ecf.identity.source,3.1.0.201110251336
No repository found containing: osgi.bundle,org.eclipse.ecf.provider.filetransfer.httpclient.source,4.0.0.201110251336
No repository found containing: osgi.bundle,org.eclipse.ecf.provider.filetransfer.httpclient.ssl.source,1.0.0.201110251336
No repository found containing: osgi.bundle,org.eclipse.ecf.provider.filetransfer.source,3.1.0.201110251336
No repository found containing: osgi.bundle,org.eclipse.ecf.provider.filetransfer.ssl.source,1.0.0.201110251336
No repository found containing: osgi.bundle,org.eclipse.ecf.source,3.1.0.201110251336
No repository found containing: osgi.bundle,org.eclipse.ecf.ssl.source,1.0.100.201110251336 …

http://www.blog.jugnoo.com for answers to your social media marketing questions

unplug computer hold power button for 30 seconds and reset cmos

Are you sure you bought the correct battery and installed it properly?

its also possible that you unplugged some other cables inside the PC. Does the computer at least start with the POST (power on self test)?

Explain "wont be able to start after replacing it" it detail.

take the battery out and try to boot without one, if that works make sure the battery is in correctly and test voltage. if it doesnt the problem could be something else.

http://mashable.com/2012/06/26/google-seo-tips/

http://mashable.com/2012/06/26/google-seo-tips/

all your answers are to consult an expert, isnt that why we post here? anyway watch this video http://mashable.com/2012/06/26/google-seo-tips/ will expain alot.

your type is wrong
type="ArrayList<BeanClass.User>" should be something like BeanClass.User and thats it, no<> or ArrayList

i have a good tutorial you could use
http://www.exampledepot.com/egs/javax.servlet.jsp/myform.jsp.html, might not be the best way but it is a way and i like the way it works

how about a javaBean or a global variable

<jsp:setProperty 
        name="beanInstanceName" 
        {   
            property= "*"   | 
            property="propertyName" [ param="parameterName" ]   | 
            property="propertyName" value="{string | <%= expression %>}" 
        } 
/>

replace the thermal compound

try to take the power cord out and hold power button for 30 seconds, or take out cmos battery and try to boot

id recommend a barebones kit for starters, and from that built up to something better

try to reset your cmos, unplug your computer and hold down the power button for 30 s, try to boot, or take out the cmos battery for awhile

i would try to take out the battery and reset your cmos, also check the voltage of the power adaptor, if tht doesnt work id take the drives out and back them up

yes they have php in them, thats fine and thank you for this will try out soon. appreciate it

Hello,

I have 3 boxes on my website one 20x20 one 42x42 and the main picture which is 120x120. Images that are over 1mb cause the web site to load very slowly and i don't want to restrict the user to have to make a custom profile picture they should be able to upload any picture and have it down scale in size automatically. Is this possible. Yahoo.com does exactly what i want, you can upload a 4mb picture and it downscales the size on pages to decrease loading time.

i am fixing a computer and backed up files on the drive then reinstalled the os, after the reinstall the harddrive started to make a clicking noise and wont boot, is this drive broken now? all i did was reinstall the os and take a few files off. am i going to have to tell the person their harddrive is toast?

Thanks

prety sure it is cant read using an sata to usb cant detetct in bios.

its basically like this guy shows,

http://www.youtube.com/watch?v=7qSwQ4c7kIo

you set up the layout of the report with the designer, set up the database connections, then their is some code you would put in a java class that when called would pass the params you want to crystal reports and crystal reports will generate a pdf or whatever with the data in the database using the parameters chosen.

i have read through that forum, i have done all those things + more including enabling trimming of files and storing paging files on a second drive(which becomes overwritten bad idea until the drive is clean i guess), Disable indexing, system restore, compressing system files for quick decompression and more space. He says disable paging files but from what i know windows 7 cant work properly if its paging files are too small or disabled and wont boot? and that's the problem i ran into i think them being overwritten by a second install caused windows to not boot.

http://lifehacker.com/5426041/understanding-the-windows-pagefile-and-why-you-shouldnt-disable-it

anyways thanks for the advice and if i come across anything useful ill post here

here is a really good video for anyone else wanting to optimize their ssd

http://www.youtube.com/watch?v=6LTqN9FVjm8

I have a 1.5 terabyte hdd with windows 7 loaded on it but recently got a ssd drive and installed that as the system drive. All worked fine for a few weeks, but i plugged my blue ray player in and i think what happened was the paging files were set to the d (secondary drive) and the drive letters got changed with the new hardware config. So when i booted it said it couldn't boot from the ssd. so after a few hours of retrying hardware configs(none worked and could not boot, maybe booting the second drive overwrote the paging files on disk 2?). I decided to reformat my ssd and re install my os. Does anyone know exactly what caused this or how to change the system drives from one drive to another so this doesn't happen again. It wasn't that bad because it was just the os and drivers on it but would like to know how to fix it for next time. All the sata drives are set as primary drives and my ssd is set as 1st boot device and hard drive 1. since then i have deleted my windows files from my secondary drive to stop it from booting. i have my blue ray in port 1: ssd port 2: 1.5 terabyte port 3: and port 4: 500gb.

so recap, how do i change my system drive and can you move the paging files of an os back to the other drive or repair them.

@ brynFlew
could you share some tutorials for this..

i don't have a tutorial easily available without searching around, i might be able to post some of my code later on if there isn't too much stuff in there that is really important.

you can do that with crystal reports and java export to different file formats and pdf layouts including csv for excel.

How to create reports in core java

like visual basic 6.0 report

you can use crystal reports like in visual basic with Java pretty easily

use this link http://www.exampledepot.com/egs/javax.servlet.jsp/myform.jsp.html

and instead of String in the java bean use int and instead of initializing the values to "" use 0 or an int number

for the form (instead of true/false use values) and at top of header make sure you set the properties

<jsp:setProperty name="form" property="*" />

<p style="text-align:center;">Yes<input type="radio" name="check" value="true"<jsp:getProperty name="form" property="check" />/>No<input type="radio" checked="true" name="check" value="false" <jsp:getProperty name="form" property="check" />/></p>

depending on how you want to validate it you could use simple JavaScript method or a Java bean.

JavaScript form validation: http://www.w3schools.com/js/js_form_validation.asp

Java bean form validation: http://www.exampledepot.com/egs/javax.servlet.jsp/myform.jsp.html

both ways are pretty easy to do, I would recommend the Java bean method.

'''
Created on 2011-05-20

@author: Bryn Flewelling
'''
# This is a random dice game.
import random
dice1 = 0
dice2 = 0
def dice_roller():
    print "Dice Roller" 
    print "==============="
    print "1) Enter 1 to roll a six-sided dice"
    
    sum = raw_input("> ")

    if sum == '1':
        dice1 = random.randrange(1, 7)
        dice2 = random.randrange(1, 7)
        print "The first 6-Sided Die Rolled", dice1
        print "The second 6-Sided Die Rolled", dice2
    if dice1 == 1:
        print "=========="
        print "|        |" 
        print "|   0    |"
        print "|        |"
        print "=========="     
    if dice1 == 2:
        print "=========="
        print "| 0      |" 
        print "|        |"
        print "|      0 |"
        print "=========="                                 
    if dice1 == 3:
        print "=========="
        print "| 0      |" 
        print "|   0    |"
        print "|      0 |"
        print "=========="       
    if dice1 == 4:
        print "=========="
        print "| 0    0 |" 
        print "|        |"
        print "| 0    0 |"
        print "=========="  
    if dice1 == 5:
        print "=========="
        print "| 0   0  |" 
        print "|   0    |"
        print "| 0   0  |"
        print "=========="      
    if dice1 == 6:
        print "=========="
        print "| 0    0 |" 
        print "| 0    0 |"
        print "| 0    0 |"
        print "=========="     
        
    if dice2 == 1:
        print "=========="
        print "|        |" 
        print "|   0    |"
        print "|        |"
        print "=========="     
    if dice2 == 2:
        print "=========="
        print "| 0      |" 
        print "|        |"
        print "|      0 |"
        print "=========="                                 
    if dice2 == 3:
        print "=========="
        print "| 0      |" 
        print "|   0    |"
        print "|      0 |"
        print "=========="       
    if dice2 == 4:
        print "=========="
        print "| 0    0 |" 
        print "|        |"
        print "| 0    0 |"
        print "=========="  
    if dice2 == 5:
        print "=========="
        print "| 0   0  |" 
        print "|   0    |"
        print "| 0   0  |"
        print "=========="      
    if dice2 == 6:
        print "=========="
        print "| 0    0 |" 
        print "| 0    0 |"
        print "| 0    0 |"
        print "=========="        
        
input = 'C'
while 1:
    if   input == 'Q': break
    elif input == 'C': dice_roller()
    input = raw_input("press c to continue or q to quit: ").upper()

I have made a very simple dice game,

How can i output the results of the dice using this format.

Thanks for your time.

==========
|  0     |
|        |
|    0   |
==========

==========
|  0  0  |
|  0  0  |
|  0  0  |
==========

# This is a random dice game.
import random
dice1 = 0
dice2 = 0
def dice_roller():
    print "Dice Roller" 
    print "==============="
    print "1) Enter 1 to roll a six-sided dice"
    
    sum = raw_input("> ")

    if sum == '1':
        dice1 = random.randrange(1, 7)
        dice2 = random.randrange(1, 7)
        print "The first 6-Sided Die Rolled", dice1
        print "=========="
        print "|        |" 
        print "|        |"
        print "|        |"
        print "=========="     
        print "The second 6-Sided Die Rolled", dice2
        print "=========="
        print "|        |" 
        print "|        |"
        print "|        |"
        print "==========" 
        
input = 'C'
while 1:
    if   input == 'Q': break
    elif input == 'C': dice_roller()
    input = raw_input("press c to continue or q to quit: ").upper()

is this possible?

you could use jsp+javaBean

Here is a tutorial:
http://java.sun.com/j2ee/tutorial/1_3-fcs/doc/JSPBeans2.html

Here is a O'Riley book:
http://books.google.com/books?id=15wp6fmAy4sC&lpg=PP1&dq=head%20first%20servlets%20and%20jsp%202nd%20edition&pg=PP1#v=onepage&q&f=false

Here is an example of form processing(make sure it implements Serializable):
http://www.exampledepot.com/egs/javax.servlet.jsp/myform.jsp.html

good luck