4,228 Topics

Member Avatar for
Member Avatar for Kiba Ookami

I just custom ordered a system and while on new egg I took a glance at the water cooling systems on there. My question is, how exactly do they work? As an electronics student (for future computer design as hobby) I'd like to know. To me, from the pictures it …

Member Avatar for alc6379
0
104
Member Avatar for dcc

I have a Microstar K7 Pro (MS6195) main board that has 196MB of RAM, and I want to increase it to it's max cap of 768MB. My owners manual list the memory as being 168-pin unbuffered DIMM, which supports a 3.3v PC100 SDRAM. I pulled one of the modules out …

Member Avatar for DMR
0
84
Member Avatar for ingeborgdot@yah

Never have had a memory problem with anything before. I bought some mushkin blue and couldn't get anything to work. I ran memtest and one ram had thousands of errors in the first 30 seconds and the other had 24 in a minute so I sent them back. Now I …

0
69
Member Avatar for viperman224

Hey all, Just bought an ASUS Socket 370 CUV4X-E Motherboard off of Ebay for 65$. Unfortunatly, my 60 gig Maxtor (cheap drive) is about 3 years old and is on its way out. I want to buy a 200 maxtor for 100$ from staples (again cheap drive but you can't …

Member Avatar for viperman224
0
80
Member Avatar for foam

I'm having a problem with a locking up computer. The computer I'm having trouble with is constantly freezing up. Not when I play games or anything, because I can't even install a game, let alone get a CD in the drive before it freezes up. It freezes to the extent …

Member Avatar for foam
0
189
Member Avatar for pacoo2454

i running a Toshiba Satellite M35-S320 with 60gb HDD Intel Pentium M 1.5 NVIDIA GeForce FX Go5200 32mb 1.25 gb RAM and i was wondering if it was possible to share my normal RAM with my video ram, and if so how i would go about doing that with either …

Member Avatar for Coconut Monkey
0
125
Member Avatar for wayne_hill

Today as I sat down I bumped my computer as it was on, the keyboard and mouse didn't work, I cheacked all connections but it was just frozen, I tried turning it off with the normal front switch but it did nothing, I had to use the main switch at …

Member Avatar for Sir Choice™
0
120
Member Avatar for chound

Mother Board: Intel 845 Processor: Intel Celeron 2.4 ghz I'm thinking of increasing RAM to 1.024 gb of ram from 128 mb. Will the computer speed up? The memory I use normally comes to 180 when seen in task manager. Is it better that I buy 256mb ram and is …

Member Avatar for belama
0
182
Member Avatar for ingeborgdot@yah

I am going to be building a computer for a friend of mine who is a quad. It will have the speech program naturally speaking which is very memory intensive and also several others. It will have a special kind of mic and some other things. Would it make a …

Member Avatar for Phaelax
0
80
Member Avatar for nizzy1115

I am curious to see what people have to think about all of the new cpu technology coming out in the next year or so. If you were building a new computer in a year what cpu would you choose?

Member Avatar for Phaelax
0
110
Member Avatar for hippychic43

Hi, I'm trying to determine if my power supply in my acer P3 is stuffed or if it's something else. I have some pentium's lying around and want to move all of the components except the power supply from the P3 to the pentium. I would have tried it already …

0
56
Member Avatar for michaelmuntus

I'm trying to set up a new 2003 server for the school and expected just ot have to install server 2003 but I think I need to do some preliminary setting up. Power on has: Broadcom NetXtreme Ethernet Boot Agent v7.0.1 Copyright (C) 2003 Broadcom Corporation All rights reserved. Press …

Member Avatar for hollystyles
0
142
Member Avatar for p3te844

Ok, i build my own computer: ASUS p4800SE mobo HT p4 3.0GHz 800FSB HT w/heatsink 1 GB PC3200 RAM 80GB Seagate 7200RPM Onboard LAN 2x80mm fans and my POWER SUPPLY is 550w power magic psu! My computer has been running for about almost a week and everything was running fine …

Member Avatar for Thong_Ispector
0
207
Member Avatar for p3te844

What if your motherboard dies? What happens to everything else connected to it? Will it still work if I replace a new motherboard??

Member Avatar for Thong_Ispector
0
168
Member Avatar for cnn7

Hello. My system will freeze when It hits windows right after I install the drivers for my Radeon 9600 Pro video card. I then have to enter safemode to remover the drivers and the system will run. I put a Nividia gforce 2 old card back in for now. I …

Member Avatar for cnn7
0
154
Member Avatar for belama

If I would have a motherboard with four RAM slots and would like to setup two identical memory sticks so they can run in dual channel, would they have to be installed in specific slots? Thanks

Member Avatar for belama
0
114
Member Avatar for dcc
Member Avatar for ingeborgdot@yah

I have decided amd 939 board and a seagate w/ncq hard drive. How can I find a board that supports this?

Member Avatar for alc6379
0
196
Member Avatar for Blade10878

I am running windows ME, on a computer i think is a hp (label is gone) that we got from wal-mart in 1999. Now your prolly saying screw the RAM get a new computer. Enless I am wrong an RAM is cheaper. Anyways i know my way around the software …

Member Avatar for Blade10878
0
233
Member Avatar for stevio27

Is it possible (at least [I]practically[/I]) to take the motherboard out of a computer made by a big company (HP, Dell, etc) and transfer that into a custom case without any major difficulty? What would be involved in doing that? Are there only certain size cases that would work, and …

Member Avatar for alc6379
0
172
Member Avatar for worldwidelatin

[i]Massive font tags removed ^_^ - [b]Daniweb Moderators[/b][/i] The other day I was going to set up my laptop on the table, but it accidentally slid from my hand (3 inches away from table). Now the laptop is not working at all, it won’t turn on and it won’t charge. …

Member Avatar for Coconut Monkey
0
76
Member Avatar for worldwidelatin

The other day I was going to set up my laptop on the table, but it accidentally slid from my hand (3 inches away from table). Now the laptop is not working at all, it won’t turn on and it won’t charge. Does anyone have any idea on what could …

Member Avatar for worldwidelatin
0
318
Member Avatar for belikemike

I have a amd 2400 cpu. My computer is starting to freeze when playing games. In the bios I noticed the cpu temp. ranges from 65 to 72 deg. C CPU fan speed 4100 rpm. My other computer is amd 2200. cpu temp 34 deg. cpu fan speed 6200 rpm. …

Member Avatar for szukalski
0
278
Member Avatar for NuGG
Member Avatar for ikorolchuk

Is my computer pretty decent? is it on the high-end or low-end? Windows XP Service Pack 2 450 Watt PSU AMD Athlon 64 3000+ Socket 754 Gigabyte GA-K8NS 1GB RAM DDR 400 PC 3200 256 MB ATI Radeon 9600 400 mhz core Samsun 80 GIG hard drive 7200 RPM Gigabyte …

Member Avatar for ikorolchuk
0
154
Member Avatar for moderate_rock48

Hey, im rallying all the hardware together for when I build my new computer, check out all this hardware and tell me what you think. Also tell me if there is a mismatch of hardware, or something im missing, here goes: Case =ASPIRE X-Infinity Black ATX Mid-Tower Case with 350W …

Member Avatar for Cup of Squirrel
0
245
Member Avatar for jenkins_t

Lost power while in bios, now when power is applied to pc, activity light blinks once (before power on button is even pushed) and fans start, but thats it! Is there a way to default bios? Ie., jumper, removing battery??? Win 98 SE, Emachines Etower 400

Member Avatar for DMR
0
89
Member Avatar for ingeborgdot@yah

I recently thought that I had a hard drive problem because when I went in and did dskchk it said it had errors. I did a fix but the problem still existed. Many times when I would reboot it would take me to the safe mode, start normally page. Sometimes …

Member Avatar for nizzy1115
0
138
Member Avatar for capnator

My Motherboard is a Jetway V266B and in the manual it says it can support DDR (PC2100) RAM [url]http://www.jetway.com.tw/evisn/product/amd/v266b/v266b.htm[/url] Can I put DDR 400Mhz (PC3200) Memory in it? I went to a website to check out ram and they seemed to think it could. I will upgrade most of my …

Member Avatar for capnator
0
146
Member Avatar for Tzwingman

I have recently upgraded to a flat panel monitor. Since the upgrade my monitor will go to a black screen every once so often if I am playing a dvd, reviewing photos/graphics, etc. I’m thinking that my “aging

Member Avatar for Coconut Monkey
0
72

The End.