Member Avatar for tropic2090

Ok I turn on my Hp labtop, and a black screen comes up with this info:

Safe Mode
Safe mode w networking
Safe mode w command pront

Last Configuration

Start Windows Normally
-----------------------------------------------------------------
Well here is the thing I tryed all options and it keeps taking me back to the black screen is their way to fix this problem? If I have to Restore that would be ok but I would rather not Thank you

  • 2 Contributors
  • 3 Replies
  • 273 Views
  • 1 Week Discussion Span
  • Latest Post Latest Post by Johnathan

Dani AI

Generated

This is the Windows Advanced Boot Options menu and, since every choice is returning to that list, the system is failing during early startup rather than simply loading Safe Mode. Possible causes include corrupted boot files (NTLDR/boot.ini), filesystem errors, or a failing hard disk; less commonly a stuck F8 key or attached removable media can force the menu to repeat. Given ’s report that the desktop is unreachable, quick non-destructive checks are recommended first.

Quick checks to try before anything invasive:

  • Remove all USB devices, memory cards, CDs/DVDs and any external drives.
  • Power-reset the laptop: unplug AC, remove the battery if possible, hold the power button 20–30 seconds, then reconnect power and try booting.
  • Confirm no keys are stuck (especially F8). Attempt a cold boot without pressing any keys.

If the simple checks don’t help, use the Windows XP install CD to run the Recovery Console and repair boot/FS errors. Typical Recovery Console commands (replace D: with the CD-ROM letter if different):

chkdsk /r
fixboot
fixmbr
bootcfg /rebuild
copy D:\i386\ntldr C:\
copy D:\i386\ntdetect.com C:\
exit
  • chkdsk /r scans and attempts to repair filesystem errors/bad sectors.
  • fixboot and fixmbr restore the boot sector and master boot record.
  • bootcfg /rebuild recreates boot.ini. The two copy commands restore missing boot loader files.

If Recovery Console isn’t available or those commands fail, suspect hardware. A bootable Linux live USB (or removing the drive and connecting it to another PC) can allow file backup and a SMART/hard-drive test. Many laptops also include built-in diagnostics to verify the disk. As indicated, a repair install or full reinstall/factory restore is a last resort — always recover important files first if the drive is accessible.

Recommended Answers

All 3 Replies

Member Avatar for Johnathan

This is just a safe mode screen if you can access windows in any mode check your boot to see how windows itself is set to boot if this is not possible try rolling back your pc to a date when it didn't do this. It is possible that your boot sector got reconfigured some how this is very rare but a possibility.

Member Avatar for tropic2090

Yeah I tryed doing so but I can't get to my desktop what so ever I'm stuck on the SafeMode screen

Member Avatar for Johnathan

If you dont stand to loose much I would just dump the hard drive and reload windows.

Be a part of the DaniWeb community

We're a friendly, industry-focused community of developers, IT pros, digital marketers, and technology enthusiasts meeting, networking, learning, and sharing knowledge.