Hey, I was wondering if someone could help me out here. Well for the past month I have been having trouble burning my Back-up dvd movies. What happens most of the time is, the movie will burn all the way through on "Nero" and when it gets done, I put it in my dvd player, and it will start playing fine. BUT then it will freeze, so I took the dvd out and I looked on the bottom of the dvd checking to see if anything happened while it was burning, and something has. It seems that my dvd burner will burn the movie 1/4 of the way onto the dvd, then I noticed that the burning stopped and you can see a line on the dvd where it skipped, then started back up again.

Now the dvd burner is making my dvds into coasters, "nero" will burn halfway on on to the dvd, and there is skip marks every where on it, and you can see these skip marks very well, they are at the most 1/2 inches apart from where it stopped and started burning again with the error saying "Error in the Log".

Now there is one more problem, "Nero" will burn the movie 3/4's of the way without any skips in the burning process, but it will stop dead, and say Error in the log. Now if someone can shed some light on what is happening here, I would really appreciate it.

Member Avatar for thunderstorm98

Welcome to Daniweb !
First of all do not write the thread heading in this way as per Daniweb rules.

It may be caused due to cheap DVD's or may be a lense locater problem...you need give it in replacement if its in warranty.

This dvd burner is really old, it was burning at 2x, then i updated the firmware on it, now it burns close to 4x. I have used a dvd cleaner to brush off the lens, and that helped a little. The dvd burner doesn't do this all the time, I will get a good burn maybe 1 out of every 5.

Sorry about the thread name

Oh and I use Memorex dvd+r's

Member Avatar for thunderstorm98

ok no problem my friend..

There are many issues regarding DVD writers that it was not much successfull yet..try to replace the locater motor or lense or may be its centre support of disc attachment also...may be its help

I'm sort of low of resources right now, so that would have to be replaced some time later. I was thinking that maybe it could be Nero doing it, I'm going to try reinstalling the program, and if that doesn't work, then I'll try a different burning software.

I just want to make sure it's not something with the software first, I just want to check all other possibilities before I go shelling out money for no reason at all.

Member Avatar for thunderstorm98

good..when you burn any disc disable virusscan temperaly to free out some resources.

I tried burning something again, but this time I saved the log. Now I am not sure, but I think it is an error on Neros part, I seen in the log it says

D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)

See where it says NeroError, could it just be Nero, or is it just something that I'm seeing wrong?

I have copied the part of the log where it starts to gets errors and then finally stops the burning process.

11:46:25 PM #19 SPTI -1066 File SCSIPassThrough.cpp, Line 323
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07
Buffer x04cc5200: Len x804

11:46:25 PM #20 SPTI -1065 File SCSIPassThrough.cpp, Line 323
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 10 00 00 00 00 00 00 06 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x04cc8e00: Len x6

11:46:25 PM #21 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes

11:49:10 PM #22 SPTI -1135 File SCSIPassThrough.cpp, Line 323
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 05 F6 40 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x060b0000: Len x10000
0xC5 B4 E8 79 C5 53 EE 6F 8A 8E 55 BF 5D B7 A3 94
0x57 E9 5B 92 4B B6 C0 7A 12 44 86 B4 85 D4 DC 95
0x8E DB B1 B0 6E 2E 84 90 28 B6 FF F3 40 C0 D1 16

11:49:10 PM #23 CDR -1135 File Writer.cpp, Line 302
Write error
D: _NEC DVD+RW ND-1100A

11:49:10 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:49:11 PM #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

11:49:11 PM #26 SPTI -1135 File SCSIPassThrough.cpp, Line 323
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C

11:49:11 PM #27 SPTI -1176 File SCSIPassThrough.cpp, Line 323
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 03

11:49:11 PM #28 Phase 127 File dlgbrnst.cpp, Line 1725
Generating DVD high compatibility borders

11:49:11 PM #29 Phase 129 File dlgbrnst.cpp, Line 1725
Generating DVD borders completed successfully

11:49:11 PM #30 SPTI -1065 File SCSIPassThrough.cpp, Line 323
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 10 00 00 00 00 00 00 06 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x04cc8e00: Len x6

11:49:11 PM #31 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 4x (5,540 KB/s)

Member Avatar for thunderstorm98

Buffer under run protection error, whats the status of DMA ? its enable or disable ?

Dma?

Be a part of the DaniWeb community

We're a friendly, industry-focused community of developers, IT pros, digital marketers, and technology enthusiasts meeting, networking, learning, and sharing knowledge.