SillyBilly

I have an M2n-SLI Deluxe motherboard w/ AMD 64 X2 +6000 processors. I updated my bios from the suggestions of ASUS and AMD technical, all went fine except when I run my "Ableton Live" recording program, in the preferences tab, there is an option for "Support Dual Core Processors", and …

Hello everyone, I have a 300gb Sata hard drive that I partitioned into 3 partitions: (C:(System, OS) 60gb) - (D:(Music and Videos) 100gb) - (E: (My Studio) 140gb) Something happened and D: & E: disappeared. I bought a program called "Mini-tool Power data recovery" and I was successful in recovering …

if it plugs into motherboard with a cable, swap it with the other and see if it is the hub itself, or the motherboard. If it is on a card, there is no way to trouble shoot it except for uninstall the drivers and turn PC off. Before restarting pull …

You will have to send the drive off to get it unlocked. That is the down fall of "Hard drive Lock" it doesn't matter even if you put the drive in another CPU, it will be locked until unlocked. There are techs out there on the web that offer hard …

Make sure you have the settings with the little tab on the hard drive set to slave and not set to master, I hope this helps.

I have 2X nvidia 7600gt video cards run in sli and there is an S-video out of the cards. I have magnavox 20mf500t that has a CPU VGA input but only does 640X480 and it is really bad graphics. My question is,,, The TV has S-video in and it has …

I got me a new used computer from a neighbor in trade, I formatted and put win xp home on it. After getting all my basic setup done, I went in to bios and set all my security like I always do with any of my CPU's. After doing the …

You shouldn't have to reset cmos to install new ram, the bios will recognize it at start up.

Hello Daniel, Welcome!!

My video keeps flashing to black screen and then comes back immediately, so I did what Nvidia suggested, installed an earlier driver. I get the blue screen of death every once in a while or just a plain restart for no reason. I have tried two or three different drivers …

I hope this helps, It deals with what you are asking. [URL="http://www.daniweb.com/forums/thread135260.html"]http://www.daniweb.com/forums/thread135260.html[/URL]

When you say "cant do any of that!" with safe mode last known config, what do you mean?

Country Boy, If you have an old pci slot video card, try that, other wise, your bios might be set to pci instead of on board vga, check these out, it should work other wise.

Make sure that the auto connect on disconnect is checked in the setup options on the router.

The black screen you see is your boot screen, in case of computer error you will have that screen to log into safe mode or bios set up ect. you can turn it off, But I would leave it just in case.

Nvidia Gforce 7600gt video cards, I have two running SLI. one of them quit after a year or so and I bought another to replace the one. The bios info on one card is "5.73.22.39.03" And the other is "5.73.22.51.45", notice the last two groups are different? Should they be …

[URL="http://support.microsoft.com/kb/841720"]http://support.microsoft.com/kb/841720[/URL] Hope this helps!!!

Heres one for ya! I made the mistake of letting someone sit at my pc while they where spending the weekend here with our family, and after almost 3 years of good pc health, yep, I got one. Pretty smart one to, undetected by all the major spyware, and virus …

there should be a little jumper on the hard drive, make sure your spare hard drive is set to slave and the main hard drive set to Master, it should say how the jumper should be positioned on the hard drive, most hard drives are not the same jumper settings. …

I have a question, couple of years ago, I had a system failure and windows tech support help me fix it but had me do a lot of registry entries in windows recovery console. What ended up for the fix was he had me actually put the boot files on …

[url]http://support.microsoft.com/kb/313222/[/url] [url]http://www.aade.com/XPhint/XPrecovery.htm[/url] Also I attached a Zip file, just read the instructions, I got it in an email from Microsoft or I would have giving you the link. The zip file worked for me, I had pretty much same problem,,,, Good Luck, hope I helped out!:)

I have uploaded into a public file on my skydrive the tools you will need. before you use any of them, do the on line scan, just copy the url and paste it in your browser, that is the first step to recovery, then be sure after that is done, …

Well, I am going to say just a guess, since you installed everything new again, we can rule out virus attack. Next, it sounds to me like a voltage problem, the ports work when at idle, but as soon as you plug a drain source on them, they quit. I …

[QUOTE=Ancient Dragon;1116802]I have Win7 and using FF with Logitech wireless keyboard and mouse. The problem is that the mouse wheel stopped working (it won't scroll the window any more, or just scrolls intermittently for very short periods of time) but everything else works as expected. Changed the battery but that …

My brother cracked his display in his laptop and ordered a new one for it, it was the same model except something about the finish was satin, how ever, it was the only difference. He pulled the front monitor cover off and changed the LCD was very simple task on …

I have a program that is not in add/remove programs that is in control panel called "Paperport One Touch". It was a scanner and I do not use it anymore, but I can not delete the program. Any clues?

O.k, I got one for ya.... My profile is corupted so I just made a new one quick like and set it up like I had it. I then had to set up outlokk express, but I checked my mail and all my folders and mail are gone... Where does …

Right click on my computer and read there, it will tell you 64 bit, or if it says nothing about it, then it is 32 bit.

I have a flat screen HP vf15 that I fixed, I have been using My gateway VX720. Question is, which is better. I would be loosing some size going with the flat screen, but any thing for speed and quality if thats what it took. I play online games and …

I have two adapters in my machine on a ASUS mother board, and I have had the two adapters bridged. I have the latest drivers and all the easy stuff, but one of my adapters will say, "A network cable is unplugged". It might stay working for five minutes or …

My file reads this, "multi(0)disk(0)rdisk(2)partition(1)\WINDOWS="My Bad Ass Machine" /fastdetect /NoExecute=OptOut" should it not say optin instead of optout?

I need to run a new registry cleaner I bought because(Laptop) cpu will not go on line, but in safe mode, the screen is set to 640x480 and when I run the program, I can do everything but click the fix button because it is to low on screen. I …

I have purchased a wireless network card for my Laptop, "linksys 2.4ghz wireless g with srx model: wpc54gx". I am confused which router to buy. What do I need to purchase? I have looked at this one, "Linksys WRT54GS Wireless G Broadband Router with SpeedBooster in ..." Does it work …

My mom give me this scanner, Visioneer One Touch 5300 usb, and the cd that came with it is win 98. Without using cd I plugged it in and used my subcription to driver guide.com to find the driver, it recognized the device and give me the driver, I installed …

First, make sure that you have not blowed a speaker perhaps. Take an ohm meter and check the ohms of each speaker, the specs should be on case of speaker. If it's 4 ohm speaker, as long as it reads 3 to 5 ohms, you should be ok, speaker is …

goto folder options click file options and look for .exe type file and click " to change this settings" button.

I formated drive and partitioned the drive, installed windows xp and is back to it's old self, but if I change bios settings to boot from hard disk as first boot device instead of cdrom (for instaling win xp) I get a "boot disk failer" error. If I have it …

have you tried to goto control panel and then mouse settings and make sure they are set to default?

right click on desk top, select properties, then desktop, choose none, then choose screen saver and choose none, then choose appearence and change to something other than what your using. if that doesn't work, see the virus and spyware removal forums.

Make sure that the hard drive is partitioned. put in the xp cd and boot from disk, select repair, then when in repair mode, type "chkdsk /p /r" without quotes. if thats not it, boot from cd select install windows now, at prompt hit F8 to agree, then hit r …

My cpu began to slow down so I followed some advice from responses in a post I put up, still did not fix it after exhausting hours of cleaning and such. I had backed up my system with windows back up utility a few days ago and so I went …

Well over time my cpu has slowed down and I have followed all of the cleaning and virus/maleware/trojen cleanup procedures and I am clean as a whistle, but I have a very slow boot up. My question is, can I just reinstall windows and not loose any files or important …

I have cleaned and recleaned and followed all the forum tips I can find, and my cpu is still slow at boot, and just acting funny. Heres my system if this helps also. Windowsxp Service pack 3 Tower CASECOOLERMASMaster Power Supply PSU OCZ|OCZ700GXSSLI 700W MotherBoard ASUS M2N-SLI Deluxe Processor AMD|A64 …

Where would I find the config settings to set up my Nvidia nforce network controlers. I can find info on them all but configuration set up.

I have tried to use one benchmarking utility, "Mark3 or 5" and I was realy confused. Reading a few post, I am still at loss. I would like to bench mark my cpu and quake2 game while playing so I can tweak for more performance. I see post where guys …

Hello, I have within the last year built a new pc, but after all the downloading and experimenting, my machine has become cluttered and slowed down. I have read some threads that suggest having multiple partitions for certain things, which I did not do, and I have thought about just …

I have two Nvidia GeForce 7600GT cards SLI enabled with a HP Pavillion M90 Monitor and I have been messing around with smoothing my quake 2. Had great results but I have read till my eyes are blurry and I need answers. High resolution and refresh rates. I have used …

Bought a new system, and I am Already wanting faster. I want two more gig of ram. [COLOR="red"]OCZ Platinum Revision 2 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model OCZ2P800R22GK - Retail Model #: OCZ2P800R22GK Item #: N82E16820227139[/COLOR] Would be economical …

I am using the speedstream4200 with Nvidia Nforce network adapter, How do I find out what my settings should be? upgraded from 6mb to 12mb and I can not find any info on 12mb, but 6mb is all over the place.

I am using windows xp sp2 with a 6mb download and a 388kbps upload dsl with a network with two cpu's going thrue a networklynksys hub. My main cpu when I look at Task Manager Network Utilization is only 0.5% and 0.75% at its best. How would I be able …