flagstar

Click on start button and type 'msconfig' inside the blank box just above the start button (vista logo). Hit Enter afterwards Click on startup tab and untick software that you doesn't need to run on startup (which possibly the reason it auto update) like Java, Adobe Reader etc. but don't …

Which office version are you using now? Literally, inserting a clip art will also automatically create a gap (around 1.5) and if you don't use text warp, text below the clip art will be pushed down further and possibly to second page.

When you mean fan, do you refer to fan on motherboard or power supply fan?

A dumb question, maybe all of it was dumb Did you verify that your USB is even bootable? Possibly on another computer Do sony product you have has recovery partition embedded in your laptop? Do you have recovery disk that used to recover your laptop to factory default windows? And …

Since you've try the 'normal' measures to fix it, why not doing it again but this time just let it unplug from any battery/charger for a day. If this not working, then most probably you have a dead laptop already. I doubt changing RAM and even HDD would do anything …

[QUOTE=annie123;1679379]i am giving you a web address where you can find anything of ram........ [url]http://penta.com.au/index.php?main_page=index&cPath=423[/url][/QUOTE] Did you try to look at the date when's the last time it was posted? This thread was so old so please don't revive it back please.

Did you try to backtrack the upgrade from 11.10 to lower version? It happen a lot during upgrade. I would suggest to reinstall Ubuntu but this time fresh install 11.10 instead of installing 11.04 and upgrade to 11.10... Might hear from other linux users since they may have solution for …

[QUOTE=rediettoo;1678025]i have connected 20 pcs with switch which is connected to dsl router which in tern connected to isp modem.all the pcs status is limited or no connectivty. i've tried renewing ip address,reseting the router,but it didn't work. the only pc working is the one which is connected to router …

So you were saying you can't connect to network properly with the HDD with the original OS but can connect with HDD that has been cloned. Did you try to diagnose your HDD for possible bad sector?

The other one (the last partition) was probably for swapping purpose. It doesn't need to be combine with each other. Since Recovery partition was in the middle of both linux partition, very likely you can't combine both until you delete the recovery partition. There was one program that could move …

When this blue screen is happening?

I don't want to be rude but... haven't you try goggling these differences in the first place? There were a lot of sites that explain their differences so you can google them out. Try to be independent instead of relying to others. Here I help you search google for you …

I think he meant when he power on the laptop, it immediately turn off without any chances to get into BIOS at all. Unplug any battery and power adapter attach on your laptop and press the power button at least 20 seconds. Then plug in adapter and battery then try …

I need to know if you're using a desktop or a laptop and some specs that might help. first thing first, do you use your ethernet port often? if not, just disable it under device manager and use other means of internet access unless you're using a desktop.

.dll files mostly were a program files necessary for programs to run. where is the "DRMMaindrm" folder located anyway?

I don't even think type of motherboard matters when installing linux OS's although some motherboard do not play nice with some linux OS's. BTW, why bother posting so many threads?

First thing that came to mind, could be a display driver issue. Did you update it?

If I were you, if windows couldn't detect your pendrive, try linux bootable. It usually can detect problematic usb so you can back it up to your computer for a while and format the usb again.

It could be a registry corrupt since most driver including HDD will automatically update and install on the computer.

OR maybe your factory format partition wasn't exist to begin with.

Can you give more specific detail of your problem?

Hi and welcome to DaniWeb. It could be that you're not downloading .pdf files at all. Try to check the .pdf again if it was a pdf format file.

Read here first [URL="http://www.daniweb.com/hardware-and-software/microsoft-windows/viruses-spyware-and-other-nasties/threads/134865"]http://www.daniweb.com/hardware-and-software/microsoft-windows/viruses-spyware-and-other-nasties/threads/134865[/URL]

Not really a flash game but definitely will drive you insane... A must try game... - [URL="http://www.geocities.jp/z_gundam_tanosii/home/syobon-action.zip"]Syobon Action[/URL]

[QUOTE=Lu-;1622335]I have had the same problem, and the solutions here did not seem to work for me. I found these on other sites, and I believe that it has made a difference for me: Go to start->run-> Type services.msc Look for Windows Media Player network sharing service in the list …

Do a flushdns in command prompt and check connection again. Does web browsing also have problem with this apart from downloading?

Disable Java under 'msconfig' To do this, type 'msconfig' under Run and it should open a new windows. Select startup tab and disable Java and any programs that not necessarily used but do not disable any 'system32' programs.

This thread is from five years ago... Don't resurrect old thread anymore because the solution may not applicable to latest solution available. If need help or offer a solution, create new thread on right forum.

Hi and welcome to DaniWeb... Check the network if it indicated an internet access on the taskbar.

Hi and welcome to Daniweb. Switching MB serials does break your Windows if your windows was OEM version. But weird thing is this is the first time I heard it uses identical motherboard serials although in most cases it should be different. Are you sure both motherboard serials were identical?

Download firmware updater from [URL="http://www.ocztechnology.com/ssd_tools/OCZ_Vertex_3,_Vertex_3_Max_IOPS,_Agility_3,_Solid_3,_RevoDrive_3_and_RevoDrive_3_X2/"]HERE[/URL] If they say it need a firmware update, it may need one or you'll experience some problem working with it later on. OCZ SSD aren't so bad, it only applies to users who have less knowledge in computer component anyway...

Photoshop and GIMP has the addons to convert such files. While I prefer doing it manually, if you already have either one, you just need to find a good add-ons. And what's good about it, it capture frame by frame and you can just delete any frame which is unnecessary …

If you want to upgrade to newer version (XP pro in this case), might also do a fresh installation instead of upgrading. Unfortunately from my experience, your Home Premium product keys is invalid to be used for Professional so pretty much your upgrade failed. From the above post, you've already …

Personally, XP is much better than 7. It's not that user friendly but most people gotten used to it already and simply easier to use compare to windows 7... I'm quite stumped when people never mentioned to install Vista when they have either XP or 7 on their system... Windows …

Did you remember tweaking the low battery warning notification under power management?

There is. Use wubi. It'll install Linux (Ubuntu apparently) with Windows side by side without repartitioning. If you want to install linux, the best way is to repartition from linux installation itself. Linux use their own partition (ext2,ext3 etc.) so Windows will not detect your linux partition later on. Linux …

I think you should get the previous Ubuntu distro like 10.04 and 10.10... I'm still using 10.04 for their Long Term Support (LTS) so if anything's wrong they can fix it. 10.10 is good too and slightly better than 10.04 in term of graphics. I've heard so many problem involving …

Probably you forgot to update driver for your new computer. Maybe same specs but system and version inside may be different...

Well you could try to disable file sharing first. It might have something to do with the program itself not properly save the file before and now it can't even detected files that it supported. Move the faulty files to somewhere else which not in shared directory.

You can open the RAM cover at the back of your laptop. Just need to unscrew a few screws and you'll see RAM slot and RAMs attach in it. Check the head and see if it's compatible...

Check your antivirus setting, they might actually block your autorun from running. If you're running Avira, more the reason...

You can disable any auto updates apps when they run at startup. Type msconfig and hit Enter. Click on Startup tab and there should be a selection of programs that run on startup. Disable any unused program but be sure not to uncheck programs from System32 folders... You can disable …

If your screenshot was like that, then you need to reinstall drivers for your graphic card. First try to remove any additional graphic card and use the integrated graphic card and see if this still happens... If not, put back your graphic card and update the driver for your graphic …

Maybe they mistakenly locked your HDD when checking it. I'm not really sure how that happen as well but if try to format fails, might as well check the HDD for bad sector...

Well might as well try to update the driver for wireless network. OR perhaps connect an ethernet cable to your desktop (which won't use your wireless connection) and check if you can get fine connection. Test with games as well for lag spikes and stuff...

You don't need to install it's original software... There is some way but I forget how to do it... This should be some help. click [URL="http://nixcraft.com/ubuntu-debian/12020-usb-modem-ubuntu.html"]HERE[/URL]

Which mail service did he and you use? Maybe his mailbox can't open those photos. Try web-based mail and see if that works...

It could be driver problem or even virus... Test if this still happens under Safe Mode...

Did you can boot with the HDD that shown blank line in BIOS? Also check your IDE cable as well. There should be 2 IDE slot so try each one for each HDD for confirmation. If that not work, use other IDE cable if it's available (you might need to …

run 'cmd' under 'run as administrator' then type 'sfc /scannow' and it'll repair all windows related files. It may need an original Windows 7 Ultimate cd to run properly.